Smart_PDU_L/HardWare/LCD/lcd.h

#ifndef __LCD_H
#define __LCD_H

#include "sys.h"
/*
	SCL   <--------> PA5		(clock)
	SDA   <--------> PA7		(data)
	RES   <--------> PA11		(reset)
	DC		<--------> PA8		(data / cmd)
	CS    <--------> PA12   (chip select)
	BLK    <--------> PB3   (background)
*/

/*
void gpio_bit_set(uint32_t gpio_periph, uint32_t pin);

void gpio_bit_reset(uint32_t gpio_periph, uint32_t pin);

*/


#define USE_HORIZONTAL 0  //设置横屏或者竖屏显示 0或1为竖屏 2或3为横屏

#define LCD_W 240
#define LCD_H 240



#define OLED_DC_Set() gpio_bit_set(GPIOA,GPIO_PIN_8) //DC
#define OLED_DC_Clr() gpio_bit_reset(GPIOA,GPIO_PIN_8)

#define OLED_RES_Clr() gpio_bit_reset(GPIOA,GPIO_PIN_11)//RES
#define OLED_RES_Set() gpio_bit_set(GPIOA,GPIO_PIN_11)


#define OLED_CS_Clr()  gpio_bit_reset(GPIOA,GPIO_PIN_12)//CS
#define OLED_CS_Set()  gpio_bit_set(GPIOA,GPIO_PIN_12)

#define OLED_SDIN_Clr() gpio_bit_reset(GPIOA,GPIO_PIN_7)//DIN
#define OLED_SDIN_Set() gpio_bit_set(GPIOA,GPIO_PIN_7)



#define OLED_SCLK_Clr() gpio_bit_reset(GPIOA,GPIO_PIN_5)//SCL
#define OLED_SCLK_Set() gpio_bit_set(GPIOA,GPIO_PIN_5)

#define OLED_BLK_Clr()  gpio_bit_reset(GPIOD,GPIO_PIN_2)//BLK
#define OLED_BLK_Set()  gpio_bit_set(GPIOD,GPIO_PIN_2)

extern  u16 BACK_COLOR;   //背景色

void LCD_Writ_Bus(u8 dat);
void LCD_WR_DATA8(u8 dat);
void LCD_WR_DATA(u16 dat);
void LCD_WR_REG(u8 dat);
void LCD_Address_Set(u16 x1,u16 y1,u16 x2,u16 y2);
void Lcd_Init(void);
void LCD_Clear(u16 Color);
void LCD_ShowChinese(u16 x,u16 y,u8 index,u8 size,u16 color);
void LCD_DrawPoint(u16 x,u16 y,u16 color);
void LCD_DrawPoint_big(u16 x,u16 y,u16 color);
void LCD_Fill(u16 xsta,u16 ysta,u16 xend,u16 yend,u16 color);
void LCD_DrawLine(u16 x1,u16 y1,u16 x2,u16 y2,u16 color);
void LCD_DrawRectangle(u16 x1, u16 y1, u16 x2, u16 y2,u16 color);
void Draw_Circle(u16 x0,u16 y0,u8 r,u16 color);
void LCD_ShowChar(u16 x,u16 y,u8 num,u8 mode,u16 color);
void LCD_ShowString(u16 x,u16 y,const u8 *p,u16 color);
u32 mypow(u8 m,u8 n);
void LCD_ShowNum(u16 x,u16 y,u16 num,u8 len,u16 color);
void LCD_ShowNum1(u16 x,u16 y,float num,u8 len,u16 color);
void LCD_ShowPicture(u16 x1,u16 y1,u16 x2,u16 y2);


//画笔颜色
#define WHITE         	 0xFFFF
#define BLACK         	 0x0000	  
#define BLUE           	 0x001F  
#define BRED             0XF81F
#define GRED 			       0XFFE0
#define GBLUE			       0X07FF
#define RED           	 0xF800
#define MAGENTA       	 0xF81F
#define GREEN         	 0x07E0
#define CYAN          	 0x7FFF
#define YELLOW        	 0xFFE0
#define BROWN 			     0XBC40 //棕色
#define BRRED 			     0XFC07 //棕红色
#define GRAY  			     0X8430 //灰色
//GUI颜色

#define DARKBLUE      	 0X01CF	//深蓝色
#define LIGHTBLUE      	 0X7D7C	//浅蓝色  
#define GRAYBLUE       	 0X5458 //灰蓝色
//以上三色为PANEL的颜色 
 
#define LIGHTGREEN     	 0X841F //浅绿色
#define LGRAY 			     0XC618 //浅灰色(PANNEL),窗体背景色

#define LGRAYBLUE        0XA651 //浅灰蓝色(中间层颜色)
#define LBBLUE           0X2B12 //浅棕蓝色(选择条目的反色)






#endif