include("scripts/Common/DrawingUtils.js");
include("scripts/Common/FileCTRCSV.js");
include("scripts/Common/FileDMX.js");
include("scripts/Common/FileZDM.js");

// 纵断面，地面线CTR
// 有纵断面，画竖曲线半径和坡度
// 有地面线才画设计高程，地面高程，里程桩号
// 有CTR，才画桥梁，隧道
function DrawZdmAll(ratio) {
  // 比例尺
  this.ratio = ratio || 10.0;
  this.frameColor = new RColor(255, 255, 0);
}

DrawZdmAll.prototype.applyPainting = function (layer, dmxFile, zdmFile, ctrFile, isCertCsv) {
  // 图层
  var layername = layer || getLayername("ZDM", zdmFile);
  addLayerToView(layername, "white", "CONTINUOUS", RLineweight.Weight025, 0);
  setCurrentLayer(layername);
  // 如果存在同名的DXF就直接在家DXF，解决ZDM加载慢的问题
  var dxfFile = zdmFile.replace(/.\w+$/i, ".dxf");
  var qFile = new QFile(dxfFile);
  if (qFile.exists()) {
    // 绘画到ZDM
    var di = getAssignDocumentInterface(0);
    var importFile = di.importFile(dxfFile, "", false);
    di.regenerateScenes();
    di.autoZoom();
    if (importFile !== RDocumentInterface.IoErrorNoError) {
      EAction.handleUserWarning(qsTr("Error while importing file %1").arg(dxfFile));
    }
    return true;
  }
  // qsTr("地面线文件") + " (*.dmx);"
  var fileDMX = new FileDMX(dmxFile, this.ratio);
  fileDMX.applyOperation();
  var dmxData = fileDMX.getArrayData();
  // qsTr("纵断面文件") + " (*.zdm);"
  var drawZdm = new FileZDM(zdmFile, this.ratio);
  // 线绘图在生成CSV文件
  drawZdm.applyOperation();
  if (isCertCsv) {
    drawZdm.saveCsvFile();
  }
  var zdmData = drawZdm.getZDMArray();
  // qsTr("桥梁 隧道") + " (*.ctr);"
  var fileCTR = new FileCTRCSV(ctrFile, this.ratio);
  fileCTR.applyBridge(zdmData, dmxData, new RColor(31, 57, 197));
  fileCTR.applyTunnel(zdmData, new RColor(0, 128, 0));

  // 以下开始绘画表格数据
  var extreme_dmx = this.getExtremePosition(zdmData.length > 0 ? zdmData : dmxData);
  addPolylinetoView([extreme_dmx[0], extreme_dmx[2]], false, false, 0, this.frameColor);
  addPolylinetoView([extreme_dmx[1], extreme_dmx[3]], false, false, 0, this.frameColor);
  var startPoint = extreme_dmx[2];
  var endPoint = extreme_dmx[3];
  var text_width = 260;
  addPolylinetoView([[startPoint[0] - text_width, startPoint[1]], endPoint], false, false, 0, this.frameColor);
  var array = new Array();
  array.push({ name: "R", "space": 100, text: "竖曲线半径 (m)" });
  array.push({ name: "SJGC", "space": 100, text: "设计高程 (m)" });
  array.push({ name: "DMGC", "space": 100, text: "地面高程 (m)" });
  array.push({ name: "PDPC", "space": 100, text: "坡度 (%) 坡长 (m)" });
  array.push({ name: "BLZH", "space": 100, text: "百里桩号 (km)" });
  for (var i = 0; i < array.length; i++) {
    var item = array[i];
    var space = (item.space || 100);
    var text = (item.text || "").toString();
    addPolylinetoView([[startPoint[0] - text_width, startPoint[1] - space * (i + 1)], [endPoint[0], endPoint[1] - space * (i + 1)]], false, false, 0, this.frameColor);
    addSimpleTextToView(text, [startPoint[0] - text_width + 50, startPoint[1] - space * (i + 1) + 50], 15, 0, "宋体", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
    switch (item.name) {
      case "R":
        drawZdm.applyRadius([startPoint[0], startPoint[1] - space * i], space);
        break;
      case "SJGC":
        this.applyHeightMileage(dmxData, [startPoint[0], startPoint[1] - space * i], space);
        break;
      case "DMGC":
        this.applyHeightMileage(zdmData, [startPoint[0], startPoint[1] - space * i], space);
        break;
      case "PDPC":
        drawZdm.applySlope([startPoint[0], startPoint[1] - space * i], space);
        break;
      case "BLZH":
        this.applyMileage(zdmData, [startPoint[0], startPoint[1] - space * i], space);
        break;
    }
    if (i == array.length - 1) {
      addPolylinetoView([startPoint, [startPoint[0], startPoint[1] - space * (i + 1)]], false, false, 0, this.frameColor);
      addPolylinetoView([endPoint, [endPoint[0], endPoint[1] - space * (i + 1)]], false, false, 0, this.frameColor);
    }
  }
  // 居中显示
  var di = getAssignDocumentInterface(0);
  if (!isNull(di)) {
    di.autoZoom();
  }
  return true;
}
DrawZdmAll.prototype.applyHeightMileage = function (arrayData, startPoint, spacetext) {
  var space = 50;
  var spaceDistance = 0;
  for (var i = 0; i < arrayData.length; i++) {
    if (i != 0) {
      spaceDistance = spaceDistance + (arrayData[i][0] - arrayData[i - 1][0]);
    }
    if (i != 0 && spaceDistance < space) {
      // 不足最小间距
      continue;
    }
    spaceDistance = 0;
    var text = (round((arrayData[i][1]) * 100) / 100).toString();
    addSimpleTextToView(text, [arrayData[i][0], startPoint[1] - spacetext + 30], 15, 90, "宋体", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
  }
}
DrawZdmAll.prototype.applyMileage = function (arrayData, startPoint, space) {
  // 记录里程
  var mileage = 0.0;
  // 最小间距
  var space_min = 30;
  var y = startPoint[1] - space;
  for (var i = 0; i < arrayData.length; i++) {
    var x = arrayData[i][0];
    var mileage_current = x;
    if (i == 0) {
      // 显示起始桩号
      addSimpleTextToView(formatStake(mileage_current), [x, y + 10], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
      addPolylinetoView([[x, y], [x, y + 5]], false, false, 0, new RColor(255, 255, 0));
      mileage = mileage_current;
      continue;
    }
    if (mileage_current - mileage > space_min) {
      // 绘画高程文本
      addSimpleTextToView((round((mileage_current % 1000) * 1000) / 1000).toString(), [x, y + (space * 1 / 3) - 10], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
    }
    mileage = mileage_current;
  }
  // 绘制标准的百里标、千里表
  var start = arrayData[0][0];
  var end = arrayData[arrayData.length - 1][0];
  // 下一个百里标的位置
  var currentMiles = Math.ceil(start / 100) * 100;
  // 循环打印百里和千里位置
  while (currentMiles <= end) {
    if (currentMiles % 1000 === 0) {
      addSimpleTextToView("K" + Math.floor(currentMiles / 1000).toString(), [currentMiles, y + 10], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
      addPolylinetoView([[currentMiles, y], [currentMiles, y + 5]], false, false, 0, new RColor(255, 255, 0));
    } else if (currentMiles % 100 === 0) {
      var text = currentMiles - (Math.floor(currentMiles / 1000) * 1000);
      addSimpleTextToView(Math.floor(text / 100).toString(), [currentMiles, y + 10], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
      addPolylinetoView([[currentMiles, y], [currentMiles, y + 5]], false, false, 0, new RColor(255, 255, 0));
    }
    currentMiles += 100;
  }
}
DrawZdmAll.prototype.applyMileage_1010 = function (arrayData, startPoint, space) {
  var spaceDistance = 0;
  var bailiDistance = 0;
  var tenBailiDistance = 0;
  for (var i = 0; i < arrayData.length; i++) {
    if (i != 0) {
      spaceDistance = spaceDistance + (arrayData[i][0] - arrayData[i - 1][0]);
      bailiDistance = bailiDistance + (arrayData[i][0] - arrayData[i - 1][0]);
      tenBailiDistance = tenBailiDistance + (arrayData[i][0] - arrayData[i - 1][0]);
    }
    if (i == 0 || spaceDistance >= 50) {
      // 绘制桩号 必须满足最小间距
      spaceDistance = 0;
      var text = (round((arrayData[i][0] % 1000) * 1000) / 1000).toString();
      addSimpleTextToView(text, [arrayData[i][0], startPoint[1] - 50], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
    }
    if (i == 0) {
      var x = arrayData[i][0];
      addSimpleTextToView("K" + (Math.floor(arrayData[i][0] / 1000) * 1000).toString(), [x, startPoint[1] - space + 10], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
      addPolylinetoView([[x, startPoint[1] - space], [x, startPoint[1] - space + 5]], false, false, 0, new RColor(255, 255, 0));
    } else if (tenBailiDistance > 1000) {
      // 千里标 K
      tenBailiDistance = tenBailiDistance % 1000;
      bailiDistance = bailiDistance % 100;
      var x = Math.floor(arrayData[i][0] / 1000) * 1000;
      addSimpleTextToView("K" + Math.floor(arrayData[i][0] / 1000).toString(), [x, startPoint[1] - space + 10], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
      addPolylinetoView([[x, startPoint[1] - space], [x, startPoint[1] - space - 5]], false, false, 0, new RColor(255, 255, 0));
    } else if (bailiDistance > 100) {
      // 百里标
      bailiDistance = bailiDistance % 100;
      var x = Math.floor(arrayData[i][0] / 100) * 100;
      addSimpleTextToView(Math.floor(arrayData[i][0] / 100).toString(), [x, startPoint[1] - space + 10], 15, 90, "Standard", RS.VAlignTop, RS.HAlignLeft, false, false, 0);
      addPolylinetoView([[x, startPoint[1] - space], [x, startPoint[1] - space + 5]], false, false, 0, new RColor(255, 255, 0));
    }
  }
}
DrawZdmAll.prototype.getExtremePosition = function (array) {
  var len = array.length;
  if (len == 0) {
    EAction.handleUserMessage("extreme data is empty...");
    return [[0, 0], [0, 0], [0, 0], [0, 0]];
  }
  var y_min = array[0][1];
  var y_max = array[0][1];
  for (var i = 0; i < len; i++) {
    y_min = Math.min(array[i][1], y_min);
    y_max = Math.max(array[i][1], y_max);
  }
  var padding = 0;
  var verPadding = 40
  return [
    // 左上
    [array[0][0] - padding, y_max + verPadding],
    // 右上
    [array[len - 1][0] + padding, y_max + verPadding],
    // 左下
    [array[0][0] - padding, y_min - verPadding],
    //  右下
    [array[len - 1][0] + padding, y_min - verPadding],
  ];
};