#pragma once
#include "ElectricEqpmt_SwicthEqpmt.h"
#include "ElectricEqpmt_PowerBolt.h"

class ElectricEqpmt_Breaker :															//断路器
	public CElectricEqpmt_SwicthEqpmt
{
public:
	ElectricEqpmt_Breaker();
	virtual ~ElectricEqpmt_Breaker(){};

	virtual void CalculateValue(double inputv,double inputI,ELEEQPMTMAP* PEqpmtMap);
	virtual bool handle_checkprotect(int eventOper,ELEEQPMTMAP& eqpmtmap,int errorid,int protectid);
	virtual bool handle_delaytime(time_t& time, map<string, BaseElectricEqpmt*>& eqpmtmap, const DelayTimeInfo& delayparm);
	virtual bool CheckProtect(ELEEQPMTMAP& ElectricEqpmtMap,int errorid,int protectid,bool bAutoRelation = true );
	virtual void SetRemoteLock(ELEEQPMTMAP& ElectricEqpmtMap,int status,int ctrlArea,int lockType);
	virtual void CancleRemoteLock(ELEEQPMTMAP& ElectricEqpmtMap,int status,int ctrlArea);
	virtual void SetCommunicationStatus(map<string,BaseElectricEqpmt*>& ElectricEqpmtMap);
	virtual void CancleCommunicationStatus(map<string,BaseElectricEqpmt*>& ElectricEqpmtMap);

	int  CheckAutoUnionStatus(int errorid,ELEEQPMTMAP& ElectricEqpmtMap, const ProtectValue& protectValue, bool bAutoRelation = true );
	bool AddProtectRelation(ProtectValue& protect);										//增加保护关系

	void SetRepeatShut(int shutstatus);													//设置重合闸
	int  GetActiveProtectID();															//获取主保护ID
	int  EqpmtAutoBreak(ELEEQPMTMAP& ElectricEqpmtMap,const ProtectValue& protectValue, bool bAutoRelation = true );						//设备自断
	ElectricEqpmt_PowerBolt* GetBoltInShut(ELEEQPMTMAP& eqpmtmap);						//获取合闸的备自投设备
	ElectricEqpmt_PowerBolt* GetBoltInOff(ELEEQPMTMAP& eqpmtmap);						//获取分闸的备自投设备

	/*
	故障发生时联跳设备处理方法 Add By XYX 2017 12 21
	*/
	virtual bool CheckTripping( ELEEQPMTMAP& ElectricEqpmtMap,  const ProtectValue& protectValue  );

	/*
	判断断路器当前是否故障
	*/
	bool IsFault();

	/*
	联跳设备故障恢复：解除锁闭状态
	*/
	void UnLockTrippingEqpmt( ELEEQPMTMAP& ElectricEqpmtMap );

	virtual void  EqpmtCtrl(int status,ELEEQPMTMAP& ElectricEqpmtMap,string Stdid,int CtrlType, int nMark = 0);

	/*
	检查出线设备是否需要断开:手动分闸时调用
	*/
	void CheckOutLineElectricEqpmt( ELEEQPMTMAP& ElectricEqpmtMap, int nMark /*= 0*/ );

	/*
	35KV出线设备自断逻辑处理
	*/
	void PowerCutOutLineElectricEqpmt_35KV( ELEEQPMTMAP& ElectricEqpmtMap, const string& strOutLineElectricEqpmtStrID );

	/*
	400V出线设备自断逻辑处理
	*/
	void PowerCutOutLineElectricEqpmt_400V( ELEEQPMTMAP& ElectricEqpmtMap, const string& strOutLineElectricEqpmtStrID );

	/*
	400V出线设备自断
	*/
	void PowerCutCurElectricEqpmt_400V( ELEEQPMTMAP& ElectricEqpmtMap );

	/*
	35KV目联是否投入
	*/
	bool BoltPowerIn_35KV( ELEEQPMTMAP& ElectricEqpmtMap, const string& strOutLineElectricEqpmtStrID );


	/*
	目联备自投要特殊处理
	*/
	//virtual int CheckEqpmtCtrlCase(int status,ELEEQPMTMAP& ElectricEqpmtMap,int stdid,int subsysid,int trianid,int stationid,int viewid);


	virtual bool PowerCut(ELEEQPMTMAP& eqpmtmap,string sourceid,int offcase);
	virtual	bool PowerLost(ELEEQPMTMAP& eqpmtmap,string sourceid,int offcase);
	virtual bool  PowerIn(ELEEQPMTMAP& eqpmtmap,string sourceid);

private:	
	std::vector<ProtectValue> SettingProtects;	
	int ActiveProtectIndex;																//主保护索引
	//string BreakHandleID;																//断路器手车ID
/*	string AutoBoltID;*/																	//备自投ID
	int RepeatShut;																		//重合闸
	int64_t RepeatShutST;																	//重合闸开始时间
	int64_t LastShutST;																	//最后一次重合闸的时间
	/*
	重合闸执行次数及时间间隔
	*/
	static map<int, BreakerDelayTime> mapBreakerDelayTime;
	int RepeatShutIndex;

	static map<string,string> m_mapCheckedEqpmtStrID;

public:
	/*
	根据项目不同设置重合闸执行次数以及时间间隔 ADD BY XYX 2017-12-27
	*/
	static void AddRepeatShut( int nEqpmtType, int nIndex, int nDelayTime, int nOneTime );
	int GetAllRepeatShutTime( );
	int GetDelayTime( int nIndex );
	int GetOneTime();
	int GetCurIndexDelayTime();
	void ResetRepeatShutIndex()
	{
		RepeatShutIndex = 1; 
	}
	void MoveNextRepeatShutIndex()
	{
		RepeatShutIndex++;
	}
	int GetRepeatShutIndex()
	{
		return RepeatShutIndex;
	}

	private:
		string m_strBreakHandleID;		//断路器手车ID
public:
	void SetBreakHandID(string id)		//设置断路器手车
	{
		m_strBreakHandleID=id;
	}
	string  GetBreakHandleID()		//获取断路器手车
	{
		return m_strBreakHandleID;
	}
};