SCADATrainSys/CCGDServer/ElectricityVOC/ElectricDataBaseManger.h

#pragma once
#include "YD_DBOperator.h"
#include "DateBaseManger.h"
#include "ElectricEqpmt_Breaker.h"

#include "ElectricEqpmt_Line_110kV_BusLine.h"
#include "ElectricEqpmt_Line_110kV_PowerLine_Input.h"

#include "ElectricEqpmt_Line_35kV_BusLine.h"
#include "ElectricEqpmt_Line_35kV_PowerLine_Input.h"
#include "ElectricEqpmt_Line_35kV_PowerLine_Output.h"
#include "ElectricEqpmt_Line_35kV_PowerLine_Feeder.h"

#include "ElectricEqpmt_Line_DC_Positive_BusLine.h"
#include "ElectricEqpmt_Line_DC_Negative_BusLine.h"
#include "ElectricEqpmt_Line_TouchNet.h"
#include "ElectricEqpmt_Line_Track.h"
#include "ElectricEqpmt_Line_DC_PowerLine_Input.h"
#include "ElectricEqpmt_Line_DC_PowerLine_Feeder.h"
#include "ElectricEqpmt_Line_DC_ReturnLine.h"

#include "ElectricEqpmt_Line_400V_BusLine.h"
#include "ElectricEqpmt_Line_400V_PowerLine_Input.h"
#include "ElectricEqpmt_Line_400V_PowerLine_Feeder.h"

#include "ElectricEqpmt_Breaker_110kV_Input.h"
#include "ElectricEqpmt_Breaker_110kV_Circuit.h"


#include "ElectricEqpmt_Breaker_35kV.h"
#include "ElectricEqpmt_Breaker_35kV_Input.h"
#include "ElectricEqpmt_Breaker_35kV_Output.h"
#include "ElectricEqpmt_Breaker_35kV_Feeder.h"
#include "ElectricEqpmt_Breaker_35kV_Circuit.h"

#include "ElectricEqpmt_Breaker_400V.h"
#include "ElectricEqpmt_Breaker_400V_Input.h"
#include "ElectricEqpmt_Breaker_400V_Feeder.h"
#include "ElectricEqpmt_Breaker_400V_Circuit.h"

#include "ElectricEqpmt_Breaker_DC.h"
#include "ElectricEqpmt_Breaker_DC_Input.h"
#include "ElectricEqpmt_Breaker_DC_Feeder.h"

#include "ElectricEqpmt_IsolatingSwitch_ThreePosition.h"
#include "ElectricEqpmt_IsolatingSwitch_Power.h"
#include "ElectricEqpmt_IsolatingSwitch_Manual.h"

#include "ElectricEqpmt_OVPD.h"

#include "ElectricEqpmt_PowerBolt_110kV.h"
#include "ElectricEqpmt_PowerBolt_35kV.h"
#include "ElectricEqpmt_PowerBolt_400V.h"


#include "ElectricEqpmt_Breaker_DC.h"
#include "ElectricEqpmt_PowerBolt.h"
#include "ElectricEqpmt_BreakHand.h"
#include "ElectricEqpmt_IsolatingSwitch_Power.h"
#include "ElectricEqpmt_Rectifier.h"
#include "ElectricEqpmt_Line.h"
#include "ElectricEqpmt_Transformer.h"
#include "ElectricEqpmt_Transformer_Main.h"
#include "ElectricEqpmt_Transformer_Power.h"
#include "ElectricEqpmt_Transformer_Traction.h"
#include "ElectricEqpmt_IsolatingSwitch_Manual.h"
#include "ElectricEqpmt_EarthSwitch.h"
#include "ACSysMG.h"
#include "DCSysMG.h"
#include "ElectricEqpmt_TelesignalisationMng.h"
#include "ElectricEqpmt_ElcTurnOffAreaMng.h"
#include "ElectricEqpmt_SettingGroup.h"
#include "ElectricEqpmt_StationThreeLoadCut.h"
#include "ElectricEqpmt_Station400VLoadMng.h"
#include "ElectricEqpmt_ControlPermission.h"
#include "ElectricEqpmt_BreakRailPotential.h"

#include <string>
#include <sstream>
#include <iomanip>


typedef struct tgSEqpmtDEqpmtID
{
	string DEqpmtID ;
	string SEqpmtID ;
}SEqpmtDEqpmtID;
class ElectricDataBaseManger : public CDateBaseManger   //此类的作用，类中各个函数的功能或作用？？？？？
{
public:
	ElectricDataBaseManger(void);
	void setDDServerConfig(string configItem, string configValue);
	bool initDDServerConfigInfo();//电调的服务器模块配置 add by yangs
	bool initBaseEqpmtDefineInfo();//基础设备定义信息 add by yangs
 	bool SavePowerValue(int trainid,int stationid,string eqpmtid,int datatype,double tvalue);

	bool InitDC_StationInfo(DCSysMG& DcSys);//?此函数的功能和作用？
	bool InitAc_PowerLineInfo(ACSysMG& AcSys);//?此函数的功能和作用？
	bool InitAc_PowerCalNodeInfo(ACSysMG& AcSys);//?此函数的功能和作用？

	bool InitAc_PowerLineSwitch(ACSysMG& AcSys);	//读取交流侧支路关联开关编号

	bool GetEqpmt_TouchNet_FromDB(ELEEQPMTMAP* ElectricEqpmtMap,TOUCHNETMAP* TouchNetMap);//?此函数的功能和作用？
	bool GetPowerStationFromDB(ELECSTATIONMAP& stationmap);//?此函数的功能和作用？
	bool GetEqpmt_TouchNet_Track_Relation_FromDB(DCSysMG& DcSys);//?此函数的功能和作用？
	bool GetEqpmt_InPutRelation_FromDB(ELEEQPMTMAP* ElectricEqpmtMap);//?此函数的功能和作用？

	bool GetTrackRelationXDData(TrackRelationXDMAP& trackrelationxdmap);  //读取接触轨轨道关系

	bool GetEqpmtsFromDB(ELEEQPMTMAP* ElectricEqpmtMap);
	bool GetEqpmtsBeeLineFromDB(/*_RecordsetPtr r_set,*/ELEEQPMTMAP* ElectricEqpmtMap); //获取直线元件
	bool GetEqpmtsThirdTrackBeeLineFromDB(/*_RecordsetPtr r_set,*/ELEEQPMTMAP* ElectricEqpmtMap); //获取直线元件
	bool GetEqpmtsNotThirdTrackBeeLineFromDB(/*_RecordsetPtr r_set,*/ELEEQPMTMAP* ElectricEqpmtMap); //获取直线元件
	bool GetEqpmtsNotUnionCtrlBeeLineFromDB(/*_RecordsetPtr r_set,*/ELEEQPMTMAP* ElectricEqpmtMap); //获取直线元件
	bool GetEqpmtsUnionCtrlBeeLineFromDB(/*_RecordsetPtr r_set,*/ELEEQPMTMAP* ElectricEqpmtMap); //获取直线元件
	bool GetEqpmtsPicUnitFromDB(/*_RecordsetPtr r_set,*/ELEEQPMTMAP* ElectricEqpmtMap); //获取图元元件
	bool GetEqpmtsProtects(); //保护元件
	bool GetEqpmtsActUnions(); //联控
	bool GetEqpmtsHander(); //手车
	bool GetEqpmtsCtrlType(); //控制类型
	bool GetEqpmtsProtectEqpmts(); //保护关系及其设备信息
	bool GetEqpmtsCtrlUnions(); //联控、联跳
	bool InitLogicRelationData(); //初始化逻辑关系数据
	bool UpdateEqpmtBaseInfo(std::shared_ptr<iDBReadSet> r_set,BaseElectricEqpmt* pUnit);
	bool GetPreEqpmtUnionCtrlMap();
	bool GetRepeatShutData();
	bool GetEqpmtAlarmInfoFromDB(ELCEQPMTALARMINFOMAP* ElcEqpmtAlarmInfoMap); //获取电调系统设备报警点表  xyx新增
	bool GetEqpmt_EarthSwitchRelation_FromDB(ELEEQPMTMAP* ElectricEqpmtMap);//获取接地开关相关元件信息 add by yangs

	//bool GetBreakAutoBolt();

	bool GetErrorToProtectData();

	bool UpdateProtectLockingEqpmt(ELEEQPMTMAP* ElectricEqpmtMap);

	bool UpdateFaultSceneLockingEqpmt(ELEEQPMTMAP* ElectricEqpmtMap);

	bool LoadTelesignalisationData( ElectricEqpmt_TelesignalisationMng& telesignalisationMng, ELEEQPMTMAP* ElectricEqpmtMap );

	bool LoadElcTurnOffAreaData( ELEEQPMTMAP* ElectricEqpmtMap, ElectricEqpmt_ElcTurnOffAreaMng& elcTurnOffAreaMng );

	bool LoadElcEqpmtAutoBoltLogic( ELEEQPMTMAP* ElectricEqpmtMap);

	bool LoadStation400VLoadMng( ElectricEqpmt_Station400VLoadMng* pStation400VLoadMng, ELEEQPMTMAP* ElectricEqpmtMap );

	bool AddProtectingEqpmt(ELEEQPMTMAP* ElectricEqpmtMap);  //添加断路器开关所保护的故障设备，xyx

	//获取多组模式信息
	bool GetMultiModeData(MULTIMODEMAP& multimodemap);

	//模式数据加载DD
	bool GetModeInfoData(MODEDATAMAP& modemap,MODEIDDATAMAP& modeidmap );
	//断路器遥测量波动数据
	bool GetEqpmtTelemeteryValue(EQPMTTELEINFO& mapTeleInfo);

	//电环联合数据加载
	bool LoadElcToEnvRelaData(ELEEQPMTMAP* ElectricEqpmtMap, ElectricEqpmt_ElcTurnOffAreaMng& elcTurnOffAreaMng );

	//加载设备与IBP映射数据
	bool GetElectric_EqpmtStatusToIBPLight_FromDB(MapIndex_ElcEqpmtStatusToIBPLight& MIEqpmtStatusToIBPLight);

	//加载设备与IBP映射数据
	bool loadRealEqpmtRelationFromDB(ELEEQPMTMAP* ElectricEqpmtMap);


	typedef std::multimap<string,ProtectValue> ProtectValueMap;
	ProtectValueMap m_ProtectValueMap;
	AutoActUnionMAP m_AutoActUnionMap;
	InPutRelationDataMAP m_HanderRelationDataMap;
	EqpmtCtrlAreaRelationMAP m_EqpmtCtrlAreaRelationMap;
	ProtectEqpmtRelationMAP m_ProtectEqpmtRelationMap;
	ProtectEqpmtTypeMAP m_ProtectEqpmtTypeMap;
	EqpmtCtrlUnionMAP m_EqpmtCtrlUnionMap;

	std::map<string,string> m_PreEqpmtUnionCtrlMap;
	std::map<int,SEqpmtDEqpmtID> m_SEqpmtDEqpmtIDmap;

	std::string Make2IntKey(int param1, int param2) {
		std::stringstream ss;
		ss << std::setw(5) << std::setfill('0') << param1 << "_"
			<< std::setw(5) << std::setfill('0') << param2;
		return ss.str();
	}

	void SetEqpmtStartID(int nstartid){m_nEqpmtStartID = nstartid;}
	void SetDataAssociationView(string strAssView){m_strDataAssociationView = strAssView;}
	void SetMainViewID(int nViewID_35kV, int nViewID_1500V, int nViewID_400V) {
		m_nMainViewID_35kV = nViewID_35kV; 
		m_nMainViewID_1500V = nViewID_1500V;
		m_nMainViewID_400V = nViewID_400V;
	}
public:
	~ElectricDataBaseManger(void);

protected:
	int m_nMainViewID_35kV;
	int m_nMainViewID_1500V;
	int m_nMainViewID_400V;
	int m_nEqpmtStartID;	//设备起始编号
	string m_strDataAssociationView;	//数据关联视图

};