SCADATrainSys/CCGDServer/Global/SenceControlBaseDefine.h

#pragma once
#include <map>
using namespace std;

#include "EvalueItemBaseDefine.h"

//事件触发方式定义
enum EventTriggerType 
{	
	EventTriggerType_Null				= -1,		//无效
	EventTriggerType_Manual				= 0,		//人工触发
	EventTriggerType_Time				= 1,		//时间触发
	EventTriggerType_Position			= 2,		//位置触发
	EventTriggerType_Condition			= 3,		//条件触发
	EventTriggerType_MultiType			= 4,		//组合触发
};

//评价方式定义
enum EvaluateType 
{	
	EvaluateType_Null					= -1,		//未知
	EvaluateType_Subjective				= 0,		//主观评价
	EvaluateType_Objective				= 1,		//客观评价
};


//课程类型定义
enum CourseTypeDefine 
{	
	CourseType_Null					    = 0,
	CourseType_Training					= 1, 
	CourseType_Examination				= 2,		
	CourseType_Test			            = 3,			
};

//课程面向主要培训对象定义
enum MajorTypeDefine 
{	
	MajorType_Null					    = 0,
	MajorType_XD						= 101, 
	MajorType_DD						= 102,				
	MajorType_HD			            = 103,	
	MajorType_CD						= 104,				
	MajorType_WD			            = 105,		
	MajorType_Station				    = 201,				
	MajorType_Union		                = 100,		
};
//课程作业类型定义
enum TrainingTypeDefine 
{	
	TrainingType_Null					= 0,
	TrainingType_BasicOper    			= 1, 
	TrainingType_FaultDeal				= 2,					
};

//课程面向主要培训对象定义
enum MajorLevelTypeDefine 
{	
	MajorLevelType_Null					= -1,
	MajorLevelType_BasicLevel    		= 1, 
	MajorLevelType_MediumLevel			= 2,				
	MajorLevelType_HighLevel			= 3,	
	MajorLevelType_Technician			= 4,				
	MajorLevelType_HighTechnician       = 5,		
};
//基本事件类型定义
enum EventType 
{
	EventType_Null			= -1, //未知
	EventType_TrainFault	= 0,  //列车故障
	EventType_EnvirChange	= 1,  //环境变化
	EventType_emergency		= 2,  //突发事件
	EventType_XD			= 10, //行调相关
	EventType_DD			= 11, //电调相关
	EventType_HD			= 12, //环调相关
	EventType_CheZhan		= 13, //车站相关
};

//数据类型定义
enum ParaDataType 
{
	ParaDataType_Null	= -1, //未知
	ParaDataType_Int	= 1,  //整形
	ParaDataType_Float	= 2,  //浮点型
	ParaDataType_String = 3,  //字符型
};

//评价条目类型 added by zhangjiahua
enum ItemType
{
	Item_Type_XD = 1,	//行调 
	Item_Type_DD = 2,	//电调
	Item_Type_HD = 3,	//环调
	Item_Type_CZ = 4,	//车站
};

//行调操作条目类型 added by zhangjiahua
enum XD_Operate_Item
{
	XD_Operate_Item_ModeSwitch		= 1,		//模式切换
	XD_Operate_Item_RouteOperate	= 2,		//进路操作
	XD_Operate_Item_SignalOperate	= 3,		//信号机操作
	XD_Operate_Item_TrackOperate	= 4,		//区段操作
	XD_Operate_Item_BranchOperate	= 5,		//道岔操作
	XD_Operate_Item_PlatOperate		= 6,		//站台操作
	XD_Operate_Item_TrainOperate	= 7,		//列车操作
	XD_Operate_Item_TurnBackOperate = 8,		//折返操作
	XD_Operate_Item_VoiceCommu		= 9,		//语音通讯
	XD_Operate_Item_CenSta		    = 10,		//车站操作

};


//电调操作条目类型 added by zhangjiahua
enum DD_Operate_Item
{
	DD_Operate_Item_SwitchEqpmt		 = 1,		//开关设备操作
	DD_Operate_Item_PermissionChange = 2,		//控制权限转换

};

//电调开关设备操作条目类型 added by zhangjiahua
enum DD_Operate_Item_Switch
{
	Switch_Off						= 1,		//分闸
	Switch_On						= 2,		//合闸
	Switch_RemoteLock_Off			= 3,		//遥信封锁分
	Switch_RemoteLock_On			= 4,		//遥信封锁合 
	Switch_RemoteLock_Local			= 5,		//遥信封锁就地
	Switch_RemoteLock_Unlock		= 6,		//遥信解锁
	Switch_Contol_Lock				= 7,		//控制闭锁
	Switch_Contol_UnLock			= 8,		//闭锁解除
	Switch_Protect_Reset			= 9,		//故障复归
	Switch_HanderLock_Test			= 10,		//手车封锁试验
	Switch_HanderLock_Work			= 11,		//手车封锁工作
	Switch_EqpmtFixedArea_Set		= 12,		//设备定值操作
};

//电调开关设备操作条目类型 added by zhangjiahua
enum DD_Operate_Item_Perssion
{
	Permission_OCC					= 1,		//OCC控制
	Permission_Station				= 2,		//变电所控制
};

enum HD_Operate_Item
{
	HD_Operate_Item_ModeCtrl		= 1,			//设备模式控制操作
	HD_Operate_Item_TimeTabCtrl		= 2,			//设备时间表控制操作
	HD_Operate_Item_BASEqpmtCtrl	= 3,			//设备控制
	HD_Operate_Item_BASEqpmtExamine = 4,			//设备维修操作
	HD_Operate_Item_SetValue		= 5,			//设备频率开度设置操作
	HD_Operate_Item_LightGroupCtrl	= 6,			//照明场景控制操作
	HD_Operate_Item_PoolCtrl		= 7,			//给排水设备控制操作
	HD_Operate_Item_PISCtrl			= 8,			//PIS系统控制操作
	HD_Operate_Item_FasCtrl			= 9,			//车站火灾处理
	HD_Operate_Item_SectionFireCtrl	= 11,			//列车区间火灾处理
	HD_Operate_Item_StationAttack	= 12,			//车站、列车毒气袭击处理
	HD_Operate_Item_RailwayWaterAccumulation = 13,	//线路积水处理
	HD_Operate_Item_IBPCtrl			=14				//IBP盘操作反馈
};

enum HD_Operate_Item_Second
{
	HD_Operate_Item_ModeCtrl_Recover				= 2,	//火灾阻塞复位按钮进行火灾模式复位
	HD_Operate_Item_ModeCtrl_Run					= 4,	//目标模式执行
	HD_Operate_Item_TimeTabCtrl_Run					= 3,	//系统控制菜单选择时间表
	HD_Operate_Item_BASEqpmtCtrl_Check				= 3,	//设备控制校验
	HD_Operate_Item_BASEqpmtCtrl_Oper				= 4,	//设备状态更新	
	HD_Operate_Item_BASEqpmtExamine_Set				= 4,	//设备检修状态设置
	HD_Operate_Item_SetValue_Check					= 2,	// 
	HD_Operate_Item_SetValue_Value					= 3,	//设置频率/开度值
	HD_Operate_Item_LightGroupCtrl_Read				= 3,	//读取照明数据
	HD_Operate_Item_LightGroupCtrl_Save				= 4,	//保存照明数据
	HD_Operate_Item_LightGroupCtrl_Run				= 5,	//执行照明数据
	HD_Operate_Item_PoolCtrl_Check					= 2,	//水泵控制校验
	HD_Operate_Item_PoolCtrl_State					= 3,	//水泵设备开启
	HD_Operate_Item_SectionFireCtrl_Light			= 5,	//区间事故照明
	HD_Operate_Item_RailwayWaterAccumulation_Status = 2,	//设置 区间消防电动蝶阀
	HD_Operate_Item_IBPCtrl_ModeExecute				= 1,	//IBP盘火灾模式执行
	HD_Operate_Item_IBPCtrl_ModeReset				= 2,	//IBP盘火灾模式复位
	HD_Operate_Item_IBPCtrl_AFCRelease				= 3,	//IBP盘AFC紧急释放
	HD_Operate_Item_IBPCtrl_AFCReset				= 4		//IBP盘AFC恢复
};
//行调进路操作条目 added by zhangjiahua
enum XD_Operate_Item_Route
{
	XD_Operate_Item_Route_Build				= 1,			//进路建立
	XD_Operate_Item_Route_Cancle			= 2,			//进路取消
	XD_Operate_Item_Route_ManRelease		= 3,			//进路总人解
	XD_Operate_Item_Route_Control_Man		= 4,			//进路交人工控
	XD_Operate_Item_Route_Control_Auto		= 5,			//进路交自动控
	XD_Operate_Item_Route_Pilot				= 7,			//开放引导信号
};

//行调轨道区段操作条目 added by zhangjiahua
enum XD_Operate_Item_Track
{
	XD_Operate_Item_Track_Trace_Cut			= 1,		//区段跟踪切除
	XD_Operate_Item_Track_Trace_Set			= 2,		//区段跟踪激活
	XD_Operate_Item_Track_Confirm_Axle		= 3,		//确认计轴有效
	XD_Operate_Item_Track_SingleLock		= 4,		//区段封锁
	XD_Operate_Item_Track_SingleUnLock		= 5,		//区段解锁
	XD_Operate_Item_Track_UnLock			= 6,		//区故解
};

//行调道岔操作条目 added by zhangjiahua
enum XD_Operate_Item_Signal
{
	XD_Operate_Item_Signal_OpenAgain			= 1,		//信号重开
	XD_Operate_Item_Route_AutoRoute_Set			= 2,		//设置自动通过进路
	XD_Operate_Item_Route_AutoRoute_Cancle		= 3,		//取消自动通过进路
	XD_Operate_Item_Signal_PlanListCheck_Set	= 4,		//计划顺序检查设置
	XD_Operate_Item_Signal_PlanListCheck_Cancle = 5,		//计划顺序检查取消
	XD_Operate_Item_Signal_SingleLock			= 6,		//信号机单锁
	XD_Operate_Item_Signal_SingleUnLock			= 7,		//信号机解锁
	XD_Operate_Item_Signal_Release				= 8,		//信号机总人解

};

//行调道岔操作条目 added by zhangjiahua
enum XD_Operate_Item_Switch
{
	XD_Operate_Item_Switch_Positive			= 1,		//道岔定位
	XD_Operate_Item_Switch_Negative			= 2,		//道岔反位
	XD_Operate_Item_Switch_SingleLock		= 3,		//道岔单锁
	XD_Operate_Item_Switch_SingleUnLock		= 4,		//道岔单解
	XD_Operate_Item_Switch_Release			= 5,		//道岔总人解
	XD_Operate_Item_Switch_Block			= 6,		//道岔封锁
	XD_Operate_Item_Switch_UnBlock			= 7,		//道岔解封
	XD_Operate_Item_Switch_AxleCount_Reset  = 8,		//道岔计轴预复位

};

//行调站台操作条目 added by zhangjiahua
enum XD_Operate_Item_Plat
{
	XD_Operate_Item_Plat_HoldTrain_Set			= 1,		//设置扣车
	XD_Operate_Item_Plat_HoldTrain_Cancle		= 2,		//取消扣车
	XD_Operate_Item_Plat_SkipStop_Set			= 3,		//设置跳停
	XD_Operate_Item_Plat_SkipStop_Cancle		= 4,		//取消跳停
	XD_Operate_Item_Plat_SendTrain_Advance		= 5,		//提前发车
	XD_Operate_Item_Plat_Enable_Auto_HoldTrain  = 6,		//设置区间列车数量限制
	XD_Operate_Item_Plat_Disable_Auto_HoldTrain = 7,		//取消区间列车数量限制
	XD_Operate_Item_Plat_Set_StopTime			= 8,		//设置停站时间
	XD_Operate_Item_Plat_ClearPassanger_Set		= 9,		//设置站台清客
	XD_Operate_Item_Plat_ClearPassanger_Cancle  = 10,		//取消站台清客
};

// 基本事件信息
struct BASE_EVENT
{
	int			 nEventID;								//事件号
	int			 nEventType;							//事件类型
	int			 EventSubType1;							//事件子类型1
	int			 EventSubType2;							//事件子类型2

	int			 AssociParaType[5];						//关联参数-类型
	BOOL 		 bIsGeneralFlag;						//是否是视景通用类

	std::string	EventTypeName;							//事件类型名称
	std::string	EventSubType1Name;						//事件子类型1名称
	std::string EventSubType2Name;						//事件子类型2名称

	BASE_EVENT()
	{
		nEventID			= -1;						//事件号
		nEventType			= -1;						//事件类型
		EventSubType1		= -1;						//事件子类型1
		EventSubType2		= -1;						//事件子类型2

		for ( int nIndex = 0; nIndex < 5; nIndex++ )
		{
			AssociParaType[nIndex] = ParaDataType_Null; //关联参数-类型
		}

		bIsGeneralFlag		= FALSE;					//是否通用事件

		EventTypeName		= "";						//事件类型名称
		EventSubType1Name	= "";						//事件子类型1名称
		EventSubType2Name	= "";						//事件子类型2名称
	}
};
typedef map<int, BASE_EVENT>	Map_BasicEvent;

// 课程事件信息
struct COURSE_EVENT 			                //课程预置事件信息
{
	int       nEventIndex;						//事件索引
	int       nBasicEventID;					//基本事件号
	int       nTriggerType;						//触发方式

	std::string  Str_EventName;					//事件名称
	std::string  Str_AssociPara[5];				//关联参数

	int       nTriggerCondition[8];             //触发条件
	BOOL	  bSetFlag;							//设置标志(设置/取消)
	BOOL      bTriggerStatus;					//触发状态(已触发/未触发)
	BOOL      bIsManTriggerFlag;                //人工触发标志(人工/自动)
	

	BASE_EVENT* m_pBaseEvent;					//基本事件对象

	COURSE_EVENT()
	{
		nEventIndex			= -1;				//事件编号
		nBasicEventID		= -1;				//基本事件号
		Str_EventName		= "";				//事件名称
		nTriggerType		= -1;				//触发方式
		bSetFlag			= TRUE;				//设置标志
		bTriggerStatus		= FALSE;			//触发状态
		bIsManTriggerFlag	= FALSE;            //人工触发标志
		m_pBaseEvent		= NULL;

		for ( int nIndex = 0; nIndex < 5; nIndex++ )
		{
			Str_AssociPara[nIndex] = "";		//关联参数
		}

		for ( int nIndex = 0; nIndex < 8; nIndex++ )
		{
			nTriggerCondition[nIndex] = -1;     //触发条件
		}
	}
};
typedef map<int, COURSE_EVENT>			Map_CourseEvent;
typedef map<int, tgSimulateTrainUpdate> Map_TrainUpdate;