#include "paras.h"
#include "cfg.h"


AllParasInfo DFLT_PARAS={

    .dev = {
        .product_id         = PROD_ID,
        .product_number     = "X000001",
        .product_name       = "SmartPDU",
        .product_status     = "",
        .product_type       = PROD_TYPE,
        .product_pwr_type   = PROD_POWER_TYPE,
        .product_version    = VERSION,
        .product_language   = LANGUAGE,                  //多国语言
        .product_count      = CASCADE_CNT,               //级联设备数
        .product_samp_time  = SMPLE_TIME,                //采集周期 单位ms
        .product_save_time  = SAVE_TIME,                 //保存周期 单位ms
        
        ._modbus_info = {                                //继电器控制端口
            .product_modbus_type = 0,                    //modbus模式，0: master     1: slave
            .product_modbus_baud = 115200,
            .product_modbus_addr = 1,
            .product_relay_ctrl_port = "/dev/ttyAS5",    //继电器modbus控制端口路径
        },
        
        ._network_info = {
            .mode = 1,                                   //0:dhcp   1:static
            .ip_address = "192.168.1.132",
            .mask = "255.255.255.0",
            .gateway = "192.168.1.1",
            .dns1 = "",
            .dns2 = "",
        },
        
        ._gmodbus_info = {
            .product_modbus_type = 0,                   //modbus模式，0: master     1: slave
            .product_modbus_baud = 115200,
            .product_modbus_addr = 1,
            .product_relay_ctrl_port = "/dev/ttyAS4",   //表头级联串口对应路径
        },
    },

    .relay = {
        0
    },
    
};