SmartPDCode/control/PDU-Triphasic_IO/App/Hlw8110/Hlw8110.h

#ifndef __HLW8110_H
#define __HLW8110_H	 

#include "stdio.h"
#include "Main.h"
//8112/8110 reg define
#define REG_SYSCON_ADDR         0x00
#define REG_EMUCON_ADDR         0x01
#define REG_HFCONST_ADDR        0x02
#define REG_EMUCON2_ADDR        0x13
#define REG_ANGLE_ADDR        	0x22			//相角寄存器
#define REG_UFREQ_ADDR          0x23     	//市电线性频率地址
#define REG_RMSIA_ADDR          0x24
#define REG_RMSIB_ADDR          0x25
#define REG_RMSU_ADDR           0x26
#define REG_PF_ADDR             0x27
#define REG_ENERGY_PA_ADDR			0x28
#define REG_ENERGY_PB_ADDR			0x29
#define REG_POWER_PA_ADDR       0x2C
#define REG_POWER_PB_ADDR       0x2D
#define REG_POWER_PAS_ADDR      0x2E



#define REG_OVLVL_ADDR          0x19

#define REG_INT_ADDR          	0x1D
#define REG_IE_ADDR          		0x40
#define REG_IF_ADDR          		0x41
#define REG_RIF_ADDR          	0x42

#define REG_RDATA_ADDR          0x44


#define REG_CHECKSUM_ADDR				0x6f
#define REG_RMS_IAC_ADDR				0x70
#define REG_RMS_IBC_ADDR				0x71
#define REG_RMS_UC_ADDR					0x72
#define REG_POWER_PAC_ADDR			0x73
#define REG_POWER_PBC_ADDR			0x74
#define REG_POWER_SC_ADDR				0x75
#define REG_ENERGY_AC_ADDR			0x76
#define REG_ENERGY_BC_ADDR			0x77


//宏定义
#define FALSE	0
#define TRUE	1

#define D_TIME1_50MS	50



void Init_HLW8110(void);
void Calculate_HLW8110_MeterData(void);
void Clear_RxBuf(void);
unsigned char HLW8110_checkSum_Write(unsigned char u8_Reg_length);
unsigned char HLW8110_checkSum_Read(unsigned char u8_Reg_length);
void Uart_HLW8110_WriteREG_EN(void);
void Uart_HLW8110_WriteREG_DIS(void);
void Uart_HLW8110_Set_Channel_A(void);
void Uart_Read_HLW8110_Reg(unsigned char ADDR_Reg,unsigned char u8_reg_length);
void Uart_Write_HLW8110_Reg(unsigned char ADDR_Reg,unsigned char u8_reg_length,unsigned long u32_data);
void Uart_HLW8110_Reset(void);
unsigned char Judge_CheckSum_HLW8110_Calfactor(void);
void Init_HLW8110(void);
void Check_WriteReg_Success(void);
void Read_HLW8110_IA(void);
void Read_HLW8110_U(void);
void Read_HLW8110_PA(void);
void Read_HLW8110_EA(void);
void Read_HLW8110_LineFreq(void);
void Read_HLW8110_PF(void);
void Read_HLW8110_Angle(void);
void Calculate_HLW8110_MeterData(void);

void Init_HLW8112(void);
void HLW8112_Measure(void);
void read_Hlw8110(uint8_t cs_x,uint8_t read_kWh_flag);

void read_Hlw8110_kWh(unsigned char cs_x);

#endif