SmartPDCode/pro/src/breaker_detection.c

#include "fcntl.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "breaker_detection.h"
#include "modbus_handle.h"
#include "common.h"
#include "thread.h"
#include "string.h"
#include "lock.h"

static breaker_scanner_t breaker_scanner;

int breaker_init(int gpio)
{
    char buff[1024] = {0};
    sprintf(buff,"/sys/class/gpio/gpio%d",gpio);
    //open the file
    int fd = open(buff,O_RDONLY);
    if(fd < 0)
    {
        printf("Failed to open gpio %d and create!!!!\n",gpio);
        sprintf(buff,"%s","/sys/class/gpio/export");
        fd = open(buff,O_WRONLY);
        if(fd < 0)
        {
            printf("Failed to open export file and create!!!!\n");
            goto err_1;
        }
        sprintf(buff,"%d",gpio);
        write(fd,buff,strlen(buff));
        close(fd);
        fd = 0;
        printf("determin io input deriction!!!");

        sprintf(buff,"/sys/class/gpio/gpio%d/direction",gpio);
        fd = open(buff,O_WRONLY);
        if(fd < 0)
        {
            printf("Failed to open gpio %d and create!!!!\n",gpio);
            goto err_2;
        }
        write(fd,"in",2);
    }
    close(fd);

    return 0;

err_2:
    {
        sprintf(buff,"%s","/sys/class/gpio/unexport");
        fd = open(buff,O_WRONLY);
        sprintf(buff,"%d",gpio);
        write(fd,buff,strlen(buff));
        close(fd);
    }
err_1:
    return -1;
}


int breaker_read_status(int gpio)
{
    char value_path[1024] = {0};
   char buf[3];  // 用于存储读取到的GPIO值，通常为'0'或'1'  
    ssize_t bytesRead;  
    int fd;  
    // 构造GPIO值的路径  
    sprintf(value_path, "/sys/class/gpio/gpio%d/value", gpio);  
  
    // 打开GPIO值文件以读取  
    fd = open(value_path, O_RDONLY);  
    if (fd == -1) {  
        perror("Failed to open GPIO value for reading");  
        return -1;  
    }  
  
    // 读取GPIO的值  
    bytesRead = read(fd, buf, sizeof(buf) - 1);  
    if (bytesRead == -1) {  
        perror("Failed to read from GPIO value");  
        close(fd);  
        return -1;  
    }  
  
    // 确保字符串以null终止  
    buf[bytesRead] = '\0';  
    close(fd);
    // 打印读取到的GPIO值  
   // printf("GPIO %d value: %s\n", GPIO_PE3, buf);  
    if (buf[0]=='0')
    {
        return 0;
    }else{
        return 1;
    }
    
      
}
int breaker_deinit(int gpio)
{
    char buff[1024] = {0};
    int fd = 0;
    sprintf(buff,"%s","/sys/class/gpio/unexport");
    fd = open(buff,O_WRONLY);
    sprintf(buff,"%d",gpio);
    write(fd,buff,strlen(buff));
    close(fd);
    return 0;
}


int breaker_485_get_chn_status(void* manger,int saddr,int channel,unsigned short *statue)
{
    int ret = 0 ;
    unsigned short data_temp = 0;
    ret = g_modbus_read_reg(manger,saddr,channel,&data_temp);
    if(ret<=0)
    {
        return -1 ;
    }
        
    if(data_temp)
    {
        *statue = 0;
    }else
    {
        *statue = 1;
    }
    return 0;
}

int breaker_485_get_all_chn_status(void* manger,int saddr,unsigned short *status)
{
    int ret = 0 ;
    unsigned short data_temp[6] = {0};
    ret = g_modbus_read_x_reg(manger,saddr,BREADER_485_ADDR_CHN_REG+1,BREAKER_485_CHN_MAX,data_temp);
    for(int i =0;i < BREAKER_485_CHN_MAX;i++)
    {
        if(data_temp[i])
        {
            status[i] = 0;
        }else
        {
            status[i] = 1;
        }
    }
    return 0;
}

int breaker_485_get_chns(void* manger,int saddr,unsigned short* cnt)
{
    int ret = 0 ;
    unsigned short data_temp = 0;
    ret = g_modbus_read_x_reg(manger,saddr,BREADER_485_ADDR_CHN_REG,1,&data_temp);
    if(ret<=0)
        return -1 ;

    *cnt = data_temp & 0x00ff;
    return 0;
}


void* breaker_scanner_thread(void* arg)
{
    //GlobalDeviceManager* gm= (GlobalDeviceManager*)(argv);
    thread_handle_t *h=(thread_handle_t*)(arg);
    GlobalDeviceManager* gm= (GlobalDeviceManager*)(h->arg);
   // memset(&breaker_scanner,0,sizeof(breaker_scanner));
    int ret = 0;
    uint16_t value =0;
    uint16_t status[BREAKER_485_CHN_MAX] = {0};
    //scanner all boadr
    //int count = 0;
    breaker_scanner_t * breaker=get_breaker_scanner();

    while(h->quit==0)
    {
        //改为启动的时候和web端手动添加开关的时候，检测一次开关控制板在不在线，其他时候就不扫描了
      /*  if((count % 10) == 1)
        {
            for(int i = 0; i < BREAKER_BOARD_MAX; i++)
            {
                ret = breaker_485_get_chn_status((void*)&gm->_globalRelaySampManger,
                        BREADER_485_ADDR+i,BREADER_485_ADDR_CHN_REG,&value);
                if(ret == 0)
                 {
                    breaker_scanner.breaker_flag[i] = 1;
                }else
                {
                    breaker_scanner.breaker_flag[i] = 0;
                }
            }
        }*/

        for(int i = 0; i < BREAKER_BOARD_MAX; i++)
        {
            if(breaker->breaker_flag[i])
            {

                    breaker_485_get_all_chn_status((void*)&gm->_globalRelaySampManger,BREADER_485_ADDR+i,status);
                    lock_s_hold(LOCK_ID_BREAKER);
                    memcpy(breaker->board[i].ch_status,status,sizeof(status));
                    lock_s_release(LOCK_ID_BREAKER);
                // ret = breaker_485_get_chn_status((void*)&gm->_globalRelaySampManger,
                //     BREADER_485_ADDR+i,BREADER_485_ADDR_CHN_REG,&value);
                // //lock_s_hold(LOCK_ID_BREAKER);
                // if(ret == 0)
                // {
                //     breaker_scanner.breaker_flag[i] = 1;  // board is online
                //     //breaker_485_get_all_chn_status((void*)&gm->_globalRelaySampManger,BREADER_485_ADDR+i,status);     
                //     //memcmp(breaker_scanner.board[i].scanner_info.ch_status,status,sizeof(status));
                // }else
                // {
                //     breaker_scanner.breaker_flag[i] = 0;           //board is offline
                // }
                
                
                // // lock_s_release(LOCK_ID_BREAKER);
                memset(status,0,sizeof(status));
            }else
            {
                memset(status,0,sizeof(status));
                lock_s_hold(LOCK_ID_BREAKER);
                memcpy(breaker->board[i].ch_status,status,sizeof(status));
                lock_s_release(LOCK_ID_BREAKER);
            }
        }
        sleep(1);
    }

    return NULL;
}

breaker_scanner_t *get_breaker_scanner(void)
{
    return &breaker_scanner;
}