| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175 |
- #ifndef __POWER_Hx__
- #define __POWER_Hx__
- #include "datadef.h"
- #define POWER_AC_GET_INFO 0x0FA0 //获取继电器板类型通道
- #define POWER_AC_CUR_INFO_L 0x0FAB //单相小电流继电器信息，共8路继电器
- #define POWER_AC_STAT_INFO_L 0x1071 //单相小电流继电器开关状态，共8路继电器
- #define POWER_AC_CUR_INFO_H 0x1015 //单相大电流继电器信息，共4路继电器
- #define POWER_AC_STAT_INFO_H 0x1083 //单相大电流继电器开关状态，共4路继电器
- #define POWER_AC_TOTAL_ALATRM 0x10E0 //单相控制板总体报警信息 2024.11.12
- #define POWER_AC_OPEN_DELAY_TIME_L 0x1194 //单相小电流继电器板开启延时
- #define POWER_AC_CLOSE_DELAY_TIME_L 0x11A6 //单相小电流继电器板关闭延时
- #define POWER_AC_OPEN_DELAY_TIME_H 0x11B8 //单相大电流继电器板开启延时
- #define POWER_AC_CLOSE_DELAY_TIME_H 0x11C6 //单相大电流继电器板关闭延时
- #define POWER_AC_CH_STAT_L 0x11EA //设置单相小电流通道开关状态
- #define POWER_AC_CH_STAT_H 0x11FC //设置单相大电流通道开关状态
- #define POWER_AC_THRESHOLD_L 0x1215 //设置单相小电流通道超限报警阈值
- #define POWER_AC_THRESHOLD_H 0x129F //设置单相大电流通道超限报警阈值X
- #define POWER_AC_KB_VAL_L 0x1203 //设置单相小电流通道K、B值
- #define POWER_AC_KB_VAL_H 0x124D //设置单相大电流通道K、B值
- #define POWER_AC_RESET_CONSUMP 0x1400 //重置单相耗电量
- #define POWER_AC_ALARM_CTRL 0x13EC //超限动作
- #define POWER_AC_TOTAL_THRESHOLD 0x1450 //设置单相总超限报警阈值 2024.11.12
- #define POWER_AC_ALARM_CTRL_TOTAL 0x1482 //总体超限动作 2024.11.12
- #define POWER_AC_BREAKER_INFO 0x10D6 //单相控制板开关检测信息
- #define POWER_DC_SET_STAT 0x120A //设置直流继电器开关状态
- #define POWER_DC_SET_THRESHOLD 0x12E9 //设置直流继电器超限报警X
- #define POWER_DC_SET_KB_VAL 0x136D //设置直流通道K、B值
- #define POWER_DC_SET_OPEN_DELAY 0x11D4 //直流继电器控制板开启延时
- #define POWER_DC_SET_CLOSE_DELAY 0x11DF //直流继电器控制板关闭延时
- #define POWER_DC_SET_OUT_INFO 0x104F //直流继电器电路控制板信息，采集一路输出
- #define POWER_DC_SET_STAT_INFO 0x1097 //直流继电器电路控制板开关状态，采集一路输出
- #define POWER_DC_SET_IN_INFO 0x105F //直流总电流电压采集控制板，采集设备输入电压和输入电流
- #define POWER_DC_INFO 0x1770 //获取直流PDU类型通道
- #define POWER_DC_TOTAL_ALARM 0x1776 //直流PDU总报警信息 2024.11.12
- #define POWER_DC_OUT_INFO 0x177A //直流PDU输出
- #define POWER_DC_STAT_INFO 0x17E2 //直流PDU开关状
- #define POWER_DC_WARNING 0x179A //直流PDU报警信息
- #define POWER_DC_STAT_ERROR 0x17E4 //直流PDU故障状态
- #define POWER_DC_IN_INFO 0x1772 //直流PDU采集输入电压与输入电
- #define POWER_DC_OPEN_DELAY 0x17E6 //直流PDU延时
- #define POWER_DC_CLOSE_DELAY 0x17F6 //直流PDU延时
- #define POWER_DC_THRESHOLD_VOL_MAX 0x17A2 //max voltage threshold
- #define POWER_DC_THRESHOLD_VOL_MIN 0x17B2 //min voltage threshold
- #define POWER_DC_THRESHOLD_CUR_MAX 0x17C2 //max current threshold
- #define POWER_DC_THRESHOLD_CUR_MIN 0x17D2 //max current threshold
- #define POWER_DC_THRESHOLD_POWER_MAX 0x1810 //max power threshold
- #define POWER_DC_THRESHOLD_POWERCON_MAX 0x181A //max powercon threshold
- #define POWER_DC_ALL_OPEN_INFO 0x1806 //ALL OPEN直流PDU开关状
- #define POWER_DC_ALL_CLOSE_INFO 0x1807 //ALL OPEN直流PDU开关状
- #define POWER_DC_ALARM_CTRL 0x182E //超限动作
- #define POWER_DC_CONSUMP_CLEAR 0x1838 //重置直流耗电量
- #define POWER_DC_THRESHOLD_TOTAL_VOL_MAX 0x184C //max total voltage threshold 2024.11.12
- #define POWER_DC_THRESHOLD_TOTAL_VOL_MIN 0x184D //min total voltage threshold 2024.11.12
- #define POWER_DC_THRESHOLD_TOTAL_CUR_MAX 0x184E //max total current threshold 2024.11.12
- #define POWER_DC_THRESHOLD_TOTAL_PWR_MAX 0x184F //max total power threshold 2024.11.12
- #define POWER_DC_THRESHOLD_TOTAL_PWRCON_MAX 0x1850 //max total powercon threshold 2024.11.12
- #define POWER_DC_ALARM_CTRL_TOTAL 0x1856 //总体超限动作 2024.11.12
- #define POWER_AC3_GET_INFO 0x1770 //获取三项类型通道
- #define POWER_AC3_IN_INFO 0x1771 //三项交流输入
- #define POWER_AC3_OUT_INFO 0x177D //三项交流输出
- #define POWER_AC3_OUT_ENABLE 0x182E //三项交流输出按通道开关状态及控制使能
- #define POWER_AC3_NF_STATUS 0x1837 //三项交流零线断路器状态
- #define POWER_AC3_CH_OUT_ENABLE 0x183A //三项交流输出按插头开关状态及控制使
- #define POWER_AC3_IN_ENABLE 0x182D //三项交流输入超限使能
- #define POWER_AC3_OUT_ERROR 0x17DE //三项交流输出故障状态
- #define POWER_AC3_IN_TOTAL_ERROR 0x17CA //三项交流总输入故障状态 2024.11.12
- #define POWER_AC3_IN_ERROR 0x17DD //三项交流输入故障状态
- #define POWER_AC3_OPEN_DELAY_TIME 0x1840 //三项交流延时
- #define POWER_AC3_CLOSE_DELAY_TIME 0x184C //三项交流延时
- #define POWER_AC3_THRESHOLD_IN 0x17EA //设置三项交流输入超限报警
- #define POWER_AC3_THRESHOLD_OUT 0x17EF //设置三项交流输出超限报警
- #define POWER_AC3_ALL_OPEN_INFO 0x182B //ALL OPEN直流PDU开关状
- #define POWER_AC3_ALL_CLOSE_INFO 0x182C //ALL OPEN直流PDU开关状
- #define POWER_AC3_THRESHOLD_VOL_MAX 0x17EF //max voltage threshold
- #define POWER_AC3_THRESHOLD_VOL_MIN 0x17FB //min voltage threshold
- #define POWER_AC3_THRESHOLD_CUR_MAX 0x1807 //max current threshold
- #define POWER_AC3_THRESHOLD_PWR_MAX 0x1813 //max POWER threshold
- #define POWER_AC3_THRESHOLD_PWRCON_MAX 0x181F //max PWRCON threshold
- #define POWER_AC3_ALARM_MISSING_PH 0x1856 //缺相报警
- #define POWER_AC3_ALARM_CTRL_TOTAL 0x185F //总体超限动作 2024.11.12
- #define POWER_AC3_ALARM_CTRL 0x1860 //超限动作
- #define POWER_AC3_RESET_CONSUMP 0x189C //重置PH耗电量
- #define POWER_AC3_RESET_CONSUMP_ALL 0x18A5 //重置all耗电量
- #define POWER_AC3_BREAKER_INFO 0x17D4 //三相控制板开关检测信息
- #define BIT(x) (1<<x)
- enum {
- AC_SINGLE_S_TYPE=1,
- AC_SINGLE_B_TYPE,
- AC_MULTI_S_TYPE,
- AC_MULTI_B_TYPE,
- DC_OUT_TYPE,
- DC_IN_TYPE,
- DCPDU_TYPE,
- TREE_AC_TYPE, //三相进三项出
- };
- enum {
- ENABLE_V_UP = (1<<1),
- ENABLE_V_DOWN = (1<<3),
- ENABLE_C_UP = (1<<5),
- ENABLE_W_UP = (1<<7),
- ENABLE_P_UP = (1<<9),
- ENABLE_ALL_UP = (1<<11),
- ENABLE_ALL_DOWN = (1<<12),
- };
- enum {
- ENABLE_AC3_V_UP = (1<<1),
- ENABLE_AC3_V_DOWN = (1<<2),
- ENABLE_AC3_C_UP = (1<<3),
- ENABLE_AC3_W_UP = (1<<4),
- ENABLE_AC3_P_UP = (1<<5),
- ENABLE_AC3_STIME = (1<<6),
- ENABLE_AC3_ETIME = (1<<7),
- };
- enum {
- ALARM_V_UP = (1<<2),
- ALARM_V_DOWN = (1<<4),
- ALARM_C_UP = (1<<6),
- ALARM_W_UP = (1<<8),
- ALARM_P_UP = (1<<10),
- };
- enum {
- THR_V_UPPER=0,
- THR_V_LOWER,
- THR_C_UPPER,
- THR_P_UPPER,
- THR_W_UPPER,
-
- THR_MAX,
- };
- typedef struct {
- float voltage_k;//电压K
- float voltage_b;//电压B
- float current_k;//电流K
- float current_b;//电流B
- }kb_val_t;
- int power_init(void);
- int power_deinit(void);
- int power_scan(void);
- int power_get_ch(uint8_t ch, power_ch_t *pch);
- int power_get_board(board_data_t *pb);
- int power_set_ch_sw(uint8_t ch, uint8_t on);
- int power_set_ch_sw_n(power_ch_t *pch);
- int power_set_board_sw(uint8_t addr, uint8_t on);
- int power_set_all_sw(uint8_t on);
- int power_set_alarm(power_ch_t *pch);
- int power_get_threshold(power_ch_t *pch);
- int power_set_threshold(power_ch_t *pch);
- int power_set_open_delay(power_ch_t *pch);
- int power_set_close_delay(power_ch_t *pch);
- int power_get_board(board_data_t *pbrd);
- int power_reset(void);
- power_all_t * power_get_all(void);
- int power_data_get(power_all_t *all);
- int power_breaker_get(breaker_all_t *all);
- #endif
|
