SmartPDCode/485/src/switch_ctrl.h

#ifndef __SWITCH_CTRL_H__
#define __SWITCH_CTRL_H__

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "common.h"

/// @brief 板子类型
enum MODBUS_BOARD_TYPE
{
    AC_SINGLE_S_TYPE=1,
    AC_SINGLE_B_TYPE,
    AC_MULTI_S_TYPE,
    AC_MULTI_B_TYPE,
    DC_OUT_TYPE,
    DC_IN_TYPE,
    DCPDU_TYPE,
    TREE_AC_TYPE,
    RS485_Type,
};

/// @brief modbus模式 主机/从机
enum MODBUS_MODE
{
    MASTER_MODE = 0 ,
    SLAVE_MODE,
};


#define _SWITCH_TYPE_CHN_INFO       0x0FA0  //获取继电器板类型通道
#define _SWITCH_AC_SINGLE_S_CUR_INFO   0x0FAB //单相小电流继电器信息，共8路继电器
#define _SWITCH_AC_SINGLE_S_STS_INFO   0x1071 //单相小电流继电器开关状态，共8路继电器
#define _SWITCH_AC_SINGLE_B_CUR_INFO   0x1015 //单相大电流继电器信息，共4路继电器
#define _SWITCH_AC_SINGLE_B_STS_INFO   0x1083 //单相大电流继电器开关状态，共4路继电器
#define _SWITCH_DC_OUT_INFO   0x104F        //直流继电器电路控制板信息，采集一路输出
#define _SWITCH_DC_STS_INFO   0x1097        //直流继电器电路控制板开关状态，采集一路输出
#define _SWITCH_DC_IN_INFO      0x105F      //直流总电流电压采集控制板，采集设备输入电压和输入电流


#define _SWITCH_AC_SINGLE_S_START_DELAY_TIME 0x1194        //单相小电流继电器板开启延时
#define _SWITCH_AC_SINGLE_S_STOP_DELAY_TIME 0x11A6         //单相小电流继电器板关闭延时

#define _SWITCH_AC_SINGLE_B_START_DELAY_TIME 0x11B8        //单相大电流继电器板开启延时
#define _SWITCH_AC_SINGLE_B_STOP_DELAY_TIME 0x11C6         //单相大电流继电器板关闭延时


#define _SWITCH_DC_START_DELAY_TIME 0x11D4 //直流继电器控制板开启延时
#define _SWITCH_DC_STOP_DELAY_TIME 0x11DF  //直流继电器控制板关闭延时

#define _SWITCH_AC_SINGLE_S_CHN_STS 0x11EA  //设置单相小电流通道开关状态
#define _SWITCH_AC_SINGLE_B_CHN_STS 0x11FC  //设置单相大电流通道开关状态
#define _SWITCH_DC_STS              0x120A   //设置直流继电器开关状态



#define _SWITCH_AC_SINGLE_S_Threshold   0x1215  //设置单相小电流通道超限报警
#define _SWITCH_AC_SINGLE_B_Threshold   0x129F  //设置单相大电流通道超限报警X
#define _SWITCH_DC_Threshold            0x12E9  //设置直流继电器超限报警X

#define _SWITCH_AC_SINGLE_S_KB_VAL  0x1203  //设置单相小电流通道K、B值
#define _SWITCH_AC_SINGLE_B_KB_VAL  0x124D  //设置单相大电流通道K、B值
#define _SWITCH_DC_KB_VAL  0x136D  //设置直流通道K、B值

#define _SWITCH_DCPDU_TYPE_CHN_INFO         0x1770          //获取直流PDU类型通道
#define _SWITCH_DCPDU_OUT_INFO              0x177A          //直流PDU输出
#define _SWITCH_DCPDU_STS_INFO              0x17E2          //直流PDU开关状
#define _SWITCH_DCPDU_STS_ERROR             0x17E4          //直流PDU故障状态
#define _SWITCH_DCPDU_IN_INFO               0x1772          //直流PDU采集输入电压与输入电
#define _SWITCH_DCPDU_START_DELAY_TIME      0x17E6          //直流PDU延时
#define _SWITCH_DCPDU_STOP_DELAY_TIME       0x17F6          //直流PDU延时
#define _SWITCH_DCPDU_MAX_VOL_THRESHOLD     0x17A2          //max voltage threshold
#define _SWITCH_DCPDU_MIN_VOL_THRESHOLD     0x17B2          //min voltage threshold
#define _SWITCH_DCPDU_MAX_CUR_THRESHOLD     0x17C2          //max current threshold
#define _SWITCH_DCPDU_MIN_CUR_THRESHOLD     0x17D2          //max current threshold
#define _SWITCH_DCPDU_ALL_OPEN_INFO         0x1806          //ALL OPEN直流PDU开关状
#define _SWITCH_DCPDU_ALL_CLOSE_INFO        0x1807          //ALL OPEN直流PDU开关状

#define _SWITCH_T_AC_TYPE_CHN_INFO         0x1770          //获取三项类型通道
#define _SWITCH_T_AC_IN_INFO               0x1771          //三项交流输入
#define _SWITCH_T_AC_OUT_INFO              0x177D          //三项交流输出
#define _SWITCH_T_AC_OUT_ENABLE            0x182E          //三项交流输出开关状态及控制使能
#define _SWITCH_T_AC_IN_ENABLE             0x182D          //三项交流输入超限使能
#define _SWITCH_T_AC_OUT_ERROR             0x17DE          //三项交流输出故障状态
#define _SWITCH_T_AC_IN_ERROR              0x17DD          //三项交流输入故障状态
#define _SWITCH_T_AC_START_DELAY_TIME      0x183A          //三项交流延时
#define _SWITCH_T_AC_STOP_DELAY_TIME       0x1846          //三项交流延时
#define _SWITCH_T_AC_SINGLE_IN_Threshold   0x17EA          //设置三项交流输入超限报警
#define _SWITCH_T_AC_SINGLE_OUT_Threshold  0x17EF          //设置三项交流输出超限报警
#define _SWITCH_T_AC_ALL_OPEN_INFO         0x182B          //ALL OPEN直流PDU开关状
#define _SWITCH_T_AC_ALL_CLOSE_INFO        0x182C          //ALL OPEN直流PDU开关状
#define _SWITCH_T_AC_MAX_VOL_THRESHOLD     0x17EF          //max voltage threshold
#define _SWITCH_T_AC_MIN_VOL_THRESHOLD     0x17FB          //min voltage threshold
#define _SWITCH_T_AC_MAX_CUR_THRESHOLD     0x1807          //max current threshold
#define _SWITCH_T_AC_MAX_PWR_THRESHOLD     0x1813          //max POWER threshold
#define _SWITCH_T_AC_MAX_PWRCON_THRESHOLD  0x181F          //max PWRCON threshold

int g_switch_get_type(void* manger,int saddr, int* type,int* chn,int nPowerType);

int g_switch_get_ac_single_s_cur_info(void* manger,int saddr,unsigned char chn,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_get_ac_single_s_all_cur_info(void* manger,int saddr,int nNumb,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_set_ac_single_s_start_time_delay(void* manger,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_ac_single_s_stop_time_delay(void* manger,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_ac_single_s_ctrl(void* manger,int saddr,unsigned short* sts);
int g_switch_set_ac_single_s_chn_ctrl(void* manger,int saddr,unsigned char chn,unsigned short sts);
int g_switch_set_ac_single_s_kb_val(void* manger,int saddr,unsigned char chn,SwitchKbVal* _kb_val);
int g_switch_set_ac_single_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);


int g_switch_get_ac_single_b_cur_info(void* manger,int saddr,unsigned char chn,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_set_ac_single_b_start_time_delay(void* manger,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_ac_single_b_stop_time_delay(void* manger,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_ac_single_b_chn_ctrl(void* manger,int saddr,unsigned char chn,unsigned short sts);
int g_switch_set_ac_single_b_ctrl(void* manger,int saddr,unsigned short* sts);
int g_switch_set_ac_single_b_kb_val(void* manger,int saddr,unsigned char chn,SwitchKbVal* _kb_val);



int g_switch_get_dc_out_info(void* manger,int saddr,unsigned char chn,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_set_dc_start_time_delay(void* manger,int saddr,unsigned int time);
int g_switch_set_dc_stop_time_delay(void* manger,int saddr,unsigned int time);
int g_switch_set_dc_ctrl(void* manger,int saddr,unsigned short sts);
int g_switch_set_dc_kb_val(void* manger,int saddr,SwitchKbVal* _kb_val);



int g_switch_get_dc_in_info(void* manger,int saddr,PowerInfo* _power,SenorTempVal* _sensorVal);

int g_switch_get_dcpdu_in_info(void* manger,int saddr,PowerInfo* _power);
int g_switch_get_dcpdu_out_info(void* manger,int saddr,unsigned char chn,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_get_dcpdu_all_out_info(void* manger,int saddr,int nNumb,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_get_dcpdu_start_time_delay(void* manger,int saddr,unsigned int* time);
int g_switch_get_dcpdu_stop_time_delay(void* manger,int saddr,unsigned int* time);
int g_switch_get_dcpdu_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_dcpdu_start_time_delay(void* manger,int saddr,int ch, unsigned int time);
int g_switch_set_dcpdu_stop_time_delay(void* manger,int saddr,int ch, unsigned int time);
int g_switch_set_dcpdu_chn_ctrl(void* manger,int saddr,unsigned char chn,unsigned short sts);
int g_switch_set_dcpdu_chns_ctrl(void* manger,int saddr,unsigned short sts,int nSet);
int g_switch_set_dcpdu_ctrl(void* manger,int saddr,unsigned short* sts);
int g_switch_set_dcpdu_max_vol_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_dcpdu_min_vol_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_dcpdu_max_cur_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_dcpdu_min_cur_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
//----------------------------------------------------------------
int g_switch_get_t_ac_in_info(void* manger,int saddr,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_get_t_ac_out_info(void* manger,int saddr,unsigned char chn,PowerInfo* _power,PowerWarningInfo* _warning);
int g_switch_get_t_ac_all_out_info(void* manger,int saddr,int nNumb,PowerInfo* _power,PowerWarningInfo* _warning);

int g_switch_get_t_ac_start_time_delay(void* manger,int saddr,unsigned int* time);
int g_switch_get_t_ac_stop_time_delay(void* manger,int saddr,unsigned int* time);
int g_switch_get_t_ac_in_threshold(void* manger,int saddr,GlobalOverManager* _global_over_manager);
int g_switch_set_t_ac_in_threshold(void* manger,int saddr,GlobalOverManager* _global_over_manager);

int g_switch_get_t_ac_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_t_ac_max_vol_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_t_ac_min_vol_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_t_ac_max_cur_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_t_ac_max_power_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_t_ac_max_pwrcon_threshold(void* manger,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_set_t_ac_start_time_delay(void* manger,int saddr,int ch, unsigned int time);
int g_switch_set_t_ac_stop_time_delay(void* manger,int saddr,int ch, unsigned int time);
int g_switch_set_t_ac_chn_ctrl(void* manger,int saddr,unsigned char chn,unsigned short sts);
int g_switch_set_t_ac_ctrl(void* manger,int saddr,unsigned short* sts);

//根据类型选择处理
int g_switch_set_all_start_time_delay(void* manger,int ntype,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_all_stop_time_delay(void* manger,int ntype,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_all_chn_ctrl(void* manger, GlobalPowerManger* _globalPowerMangerTemp,int saddr,unsigned char chn,unsigned short sts,bool isgroup);
int g_switch_set_all_ctrl(void* manger,int ntype,int saddr,unsigned short sts);
int g_switch_set_all_single_threshold(void* manger,int ntype,int saddr,char chn,GlobalOverManager* _global_over_manager);
int g_switch_get_all_out_info(void* manger,int ntype,int saddr,int nNumb,PowerInfo* _power,PowerWarningInfo* _warning);
//未实现
int g_switch_set_ac_single_s_time_delay(void* manger,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_ac_single_b_time_delay(void* manger,int saddr,unsigned char chn,unsigned int time);
int g_switch_set_dc_time_delay(void* manger,int saddr,unsigned int time);
//int g_switch_set_ac_single_s_ctrl(void* manger,int saddr,unsigned short* sts);


//重新加载端口
int ResetChmData();
#endif