SmartPDCode/control/STS/HARDWARE/Exti/Exti.c

#include "Exti.h"
#include "gd32e230x_conf.h"
#include "main.h"

#define INPUT_PIN_1   GPIO_PIN_7
#define INPUT_PIN_2   GPIO_PIN_8

#define SWTICH_PIN    GPIO_PIN_5

#define EXIT_INPUT_PIN_1  EXTI_SOURCE_PIN7
#define EXIT_INPUT_PIN_2 	EXTI_SOURCE_PIN8

#define SWITCH_INPUT_PIN  EXTI_SOURCE_PIN5

#define INPUT_EXIT_1 			EXTI_7
#define INPUT_EXIT_2      EXTI_8

#define SWITCH_EXTI       EXTI_5


static void read_input_level(uint8_t channel);
static void read_switch_level();


void sts_exti_init(void)
{
	rcu_periph_clock_enable(RCU_GPIOB);
	rcu_periph_clock_enable(RCU_CFGCMP);
	//rcu_periph_clock_enable(RCU_AF);
	
	gpio_mode_set(GPIOB,GPIO_MODE_INPUT,GPIO_PUPD_NONE,INPUT_PIN_1);
	gpio_mode_set(GPIOB,GPIO_MODE_INPUT,GPIO_PUPD_NONE,INPUT_PIN_2);
	gpio_mode_set(GPIOB,GPIO_MODE_INPUT,GPIO_PUPD_NONE,SWTICH_PIN);
	
	nvic_irq_enable(EXTI4_15_IRQn,0);
	syscfg_exti_line_config(EXTI_SOURCE_GPIOB,EXIT_INPUT_PIN_1);
	syscfg_exti_line_config(EXTI_SOURCE_GPIOB,EXIT_INPUT_PIN_2);
	syscfg_exti_line_config(EXTI_SOURCE_GPIOB,SWITCH_INPUT_PIN);
	
	exti_init(INPUT_EXIT_1,EXTI_INTERRUPT,EXTI_TRIG_BOTH);
	exti_init(INPUT_EXIT_2,EXTI_INTERRUPT,EXTI_TRIG_BOTH);
	exti_init(SWITCH_EXTI,EXTI_INTERRUPT,EXTI_TRIG_BOTH);
	
	exti_interrupt_flag_clear(INPUT_EXIT_1);
	exti_interrupt_flag_clear(INPUT_EXIT_2);
	exti_interrupt_flag_clear(SWITCH_EXTI);
	
	sts_data_t * data = get_sts();
	
	data->read_input_level = read_input_level;
	data->read_switch_level = read_switch_level;
	
}

uint8_t get_exti_in_1(void)
{
	return gpio_input_bit_get(GPIOB,INPUT_PIN_1);
}
uint8_t get_exti_in_2(void)
{
	return gpio_input_bit_get(GPIOB,INPUT_PIN_2);
}


static void read_input_level(uint8_t channel)
{
	sts_data_t * data = get_sts();
	switch(channel)
	{
		case INPUT_CHANNEL_1:
		{
			data->m_data.input_status.input_status[INPUT_CHANNEL_1]	 = get_exti_in_1();
		}
			break;
		case INPUT_CHANNEL_2:
		{
			data->m_data.input_status.input_status[INPUT_CHANNEL_2]	 = get_exti_in_2();
		}
			break;
		default:
			break;
	}
}


uint8_t get_exti_switch(void)
{
	return gpio_input_bit_get(GPIOB,SWTICH_PIN);
}

static void read_switch_level()
{
	sts_data_t * data = get_sts();
	data->switch_status = get_exti_switch();
}


void EXTI4_15_IRQHandler(void)
{
	sts_data_t * data = get_sts();
	if(RESET != exti_interrupt_flag_get(INPUT_EXIT_1))
	{
		if(get_exti_in_1() == SET) 					//rising
		{
			data->m_data.input_status.input_status[INPUT_CHANNEL_1] = 1;
		}else																//falling
		{
			data->m_data.input_status.input_status[INPUT_CHANNEL_1] = 0;
			if(data->m_data.input_status.input_status[INPUT_CHANNEL_2])
			{
				data->choise_input(INPUT_CHANNEL_2);
			}
		}
		exti_interrupt_flag_clear(INPUT_EXIT_1);
	}
	if(RESET != exti_interrupt_flag_get(INPUT_EXIT_2))
	{
		if(get_exti_in_2() == SET)				//rising
		{
			data->m_data.input_status.input_status[INPUT_CHANNEL_2] = 1;
		}else																//falling
		{
			data->m_data.input_status.input_status[INPUT_CHANNEL_2] = 0;
			if(data->m_data.input_status.input_status[INPUT_CHANNEL_1])
			{
				data->choise_input(INPUT_CHANNEL_1);
			}
		}
		exti_interrupt_flag_clear(INPUT_EXIT_2);
	}
	if(RESET != exti_interrupt_flag_get(SWITCH_EXTI))
	{
		if(get_exti_switch() == SET)     //rising
		{
			if(data->m_data.input_status.input_status[INPUT_CHANNEL_1])
			{
				data->choise_input(INPUT_CHANNEL_1);
			}
		}else														//falling
		{
			if(data->m_data.input_status.input_status[INPUT_CHANNEL_2])
			{
				data->choise_input(INPUT_CHANNEL_2);
			}
		}
		exti_interrupt_flag_clear(SWITCH_EXTI);
	}
}