SmartPDCode/ip_conf_dts/etc/init.d/rc.modules

#!/bin/sh
echo "------run rc.modules file-----"

#export boot_partition=$(fw_printenv -n boot_partition 2>/dev/null)
# if [ x${boot_partition} == xboot ];then 
#	/sbin/insmod /lib/modules/5.4.61/usb-storage.ko
#	/sbin/insmod /lib/modules/5.4.61/sunxi_gpadc.ko
	/sbin/insmod /lib/modules/5.4.61/gt9xxnew_ts.ko
	echo 0x07090160 0x083F10F7 > /sys/class/sunxi_dump/write
#	/sbin/insmod /lib/modules/5.4.61/8723ds.ko
#	/sbin/insmod /lib/modules/5.4.61/8189fs.ko
#	/sbin/insmod /lib/modules/5.4.61/r8188eu.ko
#	/sbin/insmod /lib/modules/5.4.61/8821cu.ko
#	sleep 1
#	wpa_supplicant -D wext -c /etc/wpa_supplicant.conf -i wlan0 &
#	udhcpc -i wlan0
#	wpa_supplicant  -Dnl80211 -iwlan0 -c /etc/wifi/wpa_supplicant.conf -B

amixer -D hw:audiocodec cset name='Headphone Switch' 1 && \
amixer -D hw:audiocodec cset name='Headphone volume' 25


#ifconfig eth0 192.168.1.132 up




# 读取interfaces文件  
INTERFACES_FILE="/etc/network/interfaces"  
  
# 检查文件是否存在  
if [ ! -f "$INTERFACES_FILE" ]; then  
    echo "Error: $INTERFACES_FILE not found."  
    `ifconfig  eth0 192.168.1.132 up`
else

    ifconfig eth0 up

    sleep 2

    /sbin/udhcpc -n
    if [ $? -eq 1 ]; then
      sleep 1
      interface="eth0"  
      ip_address=""  
      netmask=""
      gateway=""
      while IFS= read -r line; do  
        # 检查行是否以 iface 开始，并包含指定的接口名  
        if [[ "$line" == "iface $interface inet static" ]]; then  
            # 读取下一行，它应该是 address  
            while read -r next_line; do  
              # 检查下一行是否以 address 开始  
              if echo "$next_line" | grep -q "address" ; then  
                  # 提取IP地址（从"address "之后开始）  
                  ip_address=`echo ${next_line} | awk -F ' ' '{print $2}'`
                  #echo $ip_address
                  #break  # 找到IP后退出循环  
              elif echo "$next_line" | grep -q "netmask" ;then
                netmask=`echo ${next_line} | awk -F ' ' '{print $2}'`
              elif echo "$next_line" | grep -q "gateway" ;then
                gateway=`echo ${next_line} | awk -F ' ' '{print $2}'`
              else
                break
                #echo "asdas"
              fi 
            
            done
            
        fi  
      done < $INTERFACES_FILE 


      echo "$interface" "$ip_address"  "$gateway" "$netmask"
      if [[ "$ip_address" == ""  ]]; then
        `ifconfig  eth0 192.168.1.132 up`
      else
        `ifconfig "$interface" "$ip_address" netmask "$netmask" up`
        `route del default`
        `route add default gw "$gateway"`
      fi
    else
      echo "hello udhcp!!!"
    fi

fi  
  



./opt/led_flash &

ssh-keygen -A

/etc/init.d/sshd start

export QT_BOOT=/usr/lib/arm-qt
export QTDIR=/usr/lib/arm-qt
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib/arm-qt/lib
export LD_LIBRARY_PATH=$QTDIR/lib:$QTDIR/plugins/platforms:$LD_LIBRARY_PATH
export QT_PLUGIN_PATH=$QTDIR/plugins
export QT_QPA_GENERIC_PLUGINS=tslib:$TSLIB_TSDEVICE
export QT_QPA_FONTDIR=$QTDIR/lib/fonts
export QT_QPA_PLATFORM_PLUGIN_PATH=$QTDIR/plugins
export QT_QPA_PLATFORM=linuxfb:fb=/dev/fb1


RUNDIR=/mnt/UDISK
APPDIR=$RUNDIR/app
WEBDIR=$RUNDIR/web
SNMPDIR=$APPDIR/snmp

# source /etc/qtenv.sh
export MIBDIRS=$SNMPDIR/mibs
export LD_LIBRARY_PATH=$APPDIR/lib:${LD_LIBRARY_PATH}


start_snmpd()
{
    $SNMPDIR/bin/snmpd -Cc $SNMPDIR/conf/snmpd.conf -Lo &
    chmod 777 /var/agentx/master
}
start_pdu()
{
    #run smartPDU
    $APPDIR/smartPDU &
}
led_on()
{
    #light led
    echo 160  > /sys/class/gpio/export
    echo in > /sys/class/gpio/gpio160/direction
    echo 161 > /sys/class/gpio/export
    echo in  > /sys/class/gpio/gpio161/direction
    echo 162 > /sys/class/gpio/export
    echo in  > /sys/class/gpio/gpio162/direction
    echo 131 > /sys/class/gpio/export
    echo in > /sys/class/gpio/gpio131/direction
    echo 136 > /sys/class/gpio/export
    echo out  > /sys/class/gpio/gpio136/direction
    echo 1 > /sys/class/gpio/gpio136/value
}
start_lcd()
{
    # light lcd
    led_on
    # fbinit
    $APPDIR/Qt_Test -platform linuxfb:fb=/dev/fb1 &
}



app_start()
{
  case "$1" in
    smartPDU)
      start_pdu
      ;;
    snmpd)
      start_snmpd
      ;;
    Qt_Test)
      start_lcd
      ;;
    all)
      start_snmpd
      start_pdu
      start_lcd
      ;;
    *)
      exit 1
  esac
}
app_stop()
{
  case "$1" in
    smartPDU)
      killall $1
      ;;
    snmpd)
      killall $1
      ;;
    Qt_Test)
      killall $1
      ;;
    all)
      killall snmpd smartPDU Qt_Test
      ;;
    *)
      exit 1
  esac
}


#app_start all

start_snmpd
sleep 4 

start_pdu

sleep 5
start_lcd



sh /mnt/UDISK/app/smartMonitor.sh &

# sleep 20

# led_on

# fi