SmartPDCode/control/NEW_STS/USER/main.c

#include "gd32f30x_libopt.h"
#include "main.h"
#include "SysTick.h"
#include "Relay.h"
#include "Key.h"
#include "Led.h"
#include "Timer.h"
#include "Electricity.h"
#include "Temprature.h"
#include "Beep.h"
#include "Fan.h"
#include "Exti.h"
#include "At24xx.h"
#include "Fwdgt.h"
#include "Mb.h"
#include "R_Led.h"


#define VERSION  "V1.0.0.0"

#define UNIQU_1                       			0x1FFFF7E8
#define UNIQU_2                       			0x1FFFF7EC
#define UNIQU_3                       			0x1FFFF7F0

sts_data_t  sts_data;


sts_data_t *get_sts(void)
{
	return &sts_data;
}





int main()
{
	nvic_priority_group_set(NVIC_PRIGROUP_PRE0_SUB4);
	systick_config();
	InitKey();
	InitLED();
	InitTimer();
	InitRelay();
	
	fans_init();
	beep_init();
	temp_init();
	at24xx_init();
	electricity_init();
	sts_exti_init();
	
	
	uint8_t md_addr = ReadKeyValue();
	eMBInit(MB_RTU,md_addr,0,115200,MB_PAR_NONE);
	eMBEnable();

	strcpy(sts_data.m_data.info.date,__DATE__);
	strcat(sts_data.m_data.info.date," ");
	strcat(sts_data.m_data.info.date,__TIME__);
	strcpy(sts_data.m_data.info.ver,VERSION);
	sts_data.m_data.dev |= (STS_TYPE << 8);
	sts_data.m_data.dev |= (2 << 6);
	sts_data.m_data.dev |= 1;
	sts_data.m_data.info.channels = 1;
	sts_data.m_data.info.uniq_ID_64_95 						= *(uint32_t*)(UNIQU_3);
	sts_data.m_data.info.uniq_ID_32_63 						= *(uint32_t*)(UNIQU_2);
	sts_data.m_data.info.uniq_ID_00_31 						= *(uint32_t*)(UNIQU_1);

	Fwdgt_Init();
	
	sts_data.read_input_level(INPUT_CHANNEL_1);
	sts_data.read_input_level(INPUT_CHANNEL_2);
	sts_data.read_switch_level();
//	sts_data.m_data.input_status.input_status[INPUT_CHANNEL_1] = 1;						//test
//	sts_data.m_data.input_status.input_status[INPUT_CHANNEL_2] = 1;						//test
	sts_data.read_eeprom();

	if(sts_data.switch_status == INPUT_CHANNEL_1 && 
			sts_data.m_data.input_status.input_status[INPUT_CHANNEL_1])
	{
		sts_data.choise_input(INPUT_CHANNEL_1);
	}else
	{
		sts_data.choise_input(INPUT_CHANNEL_2);
	}
	if(sts_data.m_data.out_status)
	{
		sts_data.open_output();
	}else
	{
		sts_data.close_output();
	}
	uint8_t channel = CH448_CHANNEL_1;

uint8_t write_errp_count = 0;

	while(1){
		
		
		if(eMBCheck())
		{
			eMBEnable();
		}
		
		Fwdgt_reload();
		eMBPoll();
#if 1
		sts_data.read_temp();
#endif
		// read consumer
		if(sts_data.flag_1000ms)
		{
			sts_data.flag_1000ms = 0;
			sts_data.led_flash();
			write_errp_count++;

			if(sts_data.beep_flag)
			{
				sts_data.beep();
			}else
			{
				sts_data.clear_beep();
			}
		}

		if(write_errp_count >= 30)
		{
			write_errp_count = 0;
			sts_data.write_at24(IIC_CONSUMER_START,&sts_data.iic_consumer,sizeof(sts_data.iic_consumer));
		}
#if 1
		if(sts_data.flag_100ms)
		{
			sts_data.flag_100ms = 0;
			sts_data.read_ele(channel);
			sts_data.check_wanning(channel);
			channel ++;
		}
#endif
		if(channel == CH448_CHANNEL_NONE)
		{
			//check input and is or not swtict input 
#if 1
			if((sts_data.m_data.input_status.input_status[INPUT_CHANNEL_1]) && 
							(sts_data.m_data.input_status.input_status[INPUT_CHANNEL_2]))
			{
				sts_data.beep_flag = 0;
				if(sts_data.m_data.md_choise.choise_ch == INPUT_CHANNEL_1)
				{
					if(STS_INPUT_HAS_WANNING(sts_data.m_data.input_wanning.waning[INPUT_CHANNEL_1]))
					{
							if(STS_INPUT_HAS_WANNING(sts_data.m_data.input_wanning.waning[INPUT_CHANNEL_2]))
							{
								if(sts_data.m_data.out_status == OUT_OPEN) sts_data.close_output();
							}else
							{
								sts_data.choise_input(INPUT_CHANNEL_2);
							}
					}
				}else if(sts_data.m_data.md_choise.choise_ch == INPUT_CHANNEL_2)
				{
					if(STS_INPUT_HAS_WANNING(sts_data.m_data.input_wanning.waning[INPUT_CHANNEL_2]))
					{
							if(STS_INPUT_HAS_WANNING(sts_data.m_data.input_wanning.waning[INPUT_CHANNEL_1]))
							{
								if(sts_data.m_data.out_status == OUT_OPEN) sts_data.close_output();
							}else
							{
								sts_data.choise_input(INPUT_CHANNEL_1);
							}
					}
				}else
				{
					;
				}
			}else if((sts_data.m_data.input_status.input_status[INPUT_CHANNEL_1]) )
			{
				sts_data.beep_flag = 1;
				if(STS_INPUT_HAS_WANNING(sts_data.m_data.input_wanning.waning[INPUT_CHANNEL_1]))
				{
					if(sts_data.m_data.out_status == OUT_OPEN) sts_data.close_output();
				}
			}else if((sts_data.m_data.input_status.input_status[INPUT_CHANNEL_2]) ){
				sts_data.beep_flag = 1;
				if(STS_INPUT_HAS_WANNING(sts_data.m_data.input_wanning.waning[INPUT_CHANNEL_2]))
				{
					if(sts_data.m_data.out_status == OUT_OPEN) sts_data.close_output();
				}
			}else
			{
				sts_data.beep_flag = 1;
			}
#endif
			channel = CH448_CHANNEL_1;
		}
#if 1
		if(sts_data.m_data.temprature_flag == TEMP_ONLINE)
		{
			if(sts_data.m_data.temprature_th.fans_max_temp != 0 && sts_data.m_data.temprature_th.fans_min_temp != 0)
			{
				if(sts_data.m_data.temprature_th.fans_max_temp > sts_data.m_data.temprature_th.fans_min_temp)
				{
					if((int16_t)(sts_data.m_data.temprature) >= sts_data.m_data.temprature_th.fans_max_temp)
					{
						if(sts_data.m_data.fans_status != FANS_ON)
						{
							sts_data.fans(FANS_ON);
						}
					}else if((int16_t)(sts_data.m_data.temprature) <= sts_data.m_data.temprature_th.fans_min_temp)
					{
						if(sts_data.m_data.fans_status != FANS_OFF)
						{
							sts_data.fans(FANS_OFF);
						}
					}
				}
			}
		}
#endif
		show_wanning_led();
	}
	return 0;
}