SmartPDCode/f427/applications/ui/lang.c

#include "lang.h"
#include "datadef.h"
#include "rtdbg.h"

//--no-multibyte-chars
//--locale=english

#if 1
    #define LOGD  LOG_D
    #define LOGE  LOG_E
#else
    #define LOGD  printf
    #define LOGE  printf
#endif

const char *lang_str_pool[2][STR_ID_MAX]={
    {
        "版本",     //STR_ID_VERSION
				"日期",		  //STR_ID_DATE
        "时间",     //STR_ID_TIME
        "地址",     //STR_ID_ADDR
        "输入",     //STR_ID_INPUT
        "输出",     //STR_ID_OUTPUT
        "电压",     //STR_ID_VOLTAGE
        "电流",     //STR_ID_CURRENT
        "功率",     //STR_ID_POWER
        "耗电量",   //STR_ID_CONSUMP
        "因数",     //STR_ID_FACTOR
        "开关",     //STR_ID_SWITCH
        "温度",     //STR_ID_TEMP
        "湿度",     //STR_ID_HUMI
        "设置",     //STR_ID_SETT
        "模式",     //STR_ID_MODE
        "保存",     //STR_ID_SAVE
        "退出",     //STR_ID_QUIT
        "取消",     //STR_ID_CANCLE
        "开",       //STR_ID_ON
        "关",       //STR_ID_OFF
        "主",       //STR_ID_MASTER
        "从",       //STR_ID_SLAVE
				"网络",			//STR_ID_NET
				"掩码",			//STR_ID_NET_MASK
				"门禁",			//STR_ID_NET_GATE
				"自动",			//STR_ID_NET_AUTO
				"手动",			//STR_ID_NET_HAND
				"传感器"	,		//STR_ID_SENSOR
				"浓度",			//STR_ID_CO2
				"基本设置",	//STR_ID_BASE_SET
				"时区",			//STR_ID_ZONE
				"旋转",			//STR_ID_ROUTE
				"语言",			//STR_ID_LANG
				"中文",			//STR_ID_CN
    },
    {
        "Version",  //STR_ID_VERSION
				"Date",			//STR_ID_DATE
        "Time",     //STR_ID_TIME
        "Addr",     //STR_ID_ADDR
        "INPUT",    //STR_ID_INPUT
        "OUTPUT",   //STR_ID_OUTPUT
        "Volt",     //STR_ID_VOLTAGE
        "Curr",     //STR_ID_CURRENT
        "Power",    //STR_ID_POWER
        "Consump",  //STR_ID_CONSUMP
        "Factor",   //STR_ID_FACTOR
        "Switch",   //STR_ID_SWITCH
        "Temp",     //STR_ID_TEMP
        "Humi",     //STR_ID_HUMI
        "SETT",     //STR_ID_SETT
        "Mode",     //STR_ID_MODE
        "Save",     //STR_ID_SAVE
        "Quit",     //STR_ID_QUIT
        "Cancle",   //STR_ID_CANCLE
        "On",       //STR_ID_ON
        "Off",      //STR_ID_OFF
        "Master",   //STR_ID_MASTER
        "Slave",    //STR_ID_SLAVE
				"Net",			//STR_ID_NET
				"Mask",			//STR_ID_NET_MASK
				"Gate",			//STR_ID_NET_GATE
				"DHCP",			//STR_ID_NET_AUTO
				"STATIC",   //STR_ID_NET_HAND
				"Sensor",		//STR_ID_SENSOR
				"Density",	//STR_ID_CO2
				"Base Set",			//STR_ID_BASE_SET
				"Zone",			//STR_ID_ZONE
				"Route",			//STR_ID_ROUTE
				"Lang",			//STR_ID_LANG
				"Chinese",			//STR_ID_CN
    },
};


char* lang_get_str(int lang_id, int str_id)
{
    if(lang_id>=2 || str_id>=STR_ID_MAX) {
        return 0;
    }
    
    return (char*)lang_str_pool[lang_id][str_id];
}