SmartPDCode/ip/src/hlw8110_handle.h

#ifndef __HL8810_HANELD_H
#define __HL8810_HANELD_H

#include "termios.h"
#include "ctype.h"

//8112/8110 reg define
#define REG_SYSCON_ADDR         0x00
#define REG_EMUCON_ADDR         0x01
#define REG_HFCONST_ADDR        0x02
#define REG_EMUCON2_ADDR        0x13
#define REG_ANGLE_ADDR        	0x22			
#define REG_UFREQ_ADDR          0x23     	
#define REG_RMSIA_ADDR          0x24
#define REG_RMSIB_ADDR          0x25
#define REG_RMSU_ADDR           0x26
#define REG_PF_ADDR             0x27
#define REG_ENERGY_PA_ADDR		0x28
#define REG_ENERGY_PB_ADDR		0x29
#define REG_POWER_PA_ADDR       0x2C
#define REG_POWER_PB_ADDR       0x2D

#define REG_OVLVL_ADDR          0x19

#define REG_INT_ADDR          	0x1D
#define REG_IE_ADDR          	0x40
#define REG_IF_ADDR          	0x41
#define REG_RIF_ADDR          	0x42

#define REG_RDATA_ADDR          0x44


#define REG_CHECKSUM_ADDR			0x6f
#define REG_RMS_IAC_ADDR			0x70
#define REG_RMS_IBC_ADDR			0x71
#define REG_RMS_UC_ADDR				0x72
#define REG_POWER_PAC_ADDR			0x73
#define REG_POWER_PBC_ADDR			0x74
#define REG_POWER_SC_ADDR			0x75
#define REG_ENERGY_AC_ADDR			0x76
#define REG_ENERGY_BC_ADDR			0x77


#define CHANEL_A     0
#define CHANEL_B     1


#define D_TIME_50MS	50000
#define D_TIME_10MS	10000
#define D_TIME_20MS	20000

#define D_TIME_100MS	100000


#define D_CAL_U		1000/1000	
#define D_CAL_A_I	1000/1000		
#define D_CAL_A_P	1000/1000		
#define D_CAL_A_E	1000/1000		



#define D_CAL_B_P	1000/1000	
#define D_CAL_B_I	1000/1000		
#define D_CAL_B_E	1000/1000		

//GPIO
#define GPIO_DIR_PATH "/sys/class/gpio/"  
#define GPIO_EXPORT_PATH GPIO_DIR_PATH "export"  
#define GPIO_UNEXPORT_PATH GPIO_DIR_PATH "unexport"  
#define GPIO_VALUE_PATH GPIO_DIR_PATH "gpio%d/value"  
#define GPIO_DIRECTION_PATH GPIO_DIR_PATH "gpio%d/direction"  
#define GPIO_PE3 131
#define GPIO_PD11 107
//#define DEBUG

#ifdef DEBUG

#define   _DEBUG(dircetion,buff,size) \
            do{\
                printf("%-40s:%4d -- <%4s>",__func__,__LINE__,(dircetion ? "GET":"SET"));\
                for(int i = 0; i < size; i++)\
                {\
                    if((unsigned int)(buff[i]) > 15)\
                        printf("%X ",(unsigned int)(buff[i]));\
                    else\
                        printf("0%X ",(unsigned int)(buff[i]));\
                }\
                printf("\n");\
            }while(0);

#else

#define   _DEBUG(dircetion,buff,size)

#endif


#define SET  0
#define GET  1


typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;




typedef struct LowConf_8110 LowConf;

typedef struct LowConf_8110{
    //日志等级
    int log_level;
    //串口文件描述符
    int h_hlw8110_fd;
    uint8_t opreation;
    //串口基本配置
    struct termios bak_opt;
    struct termios new_opt;

    // hlw8110 参数
    uint16_t U16_RMSIAC_RegData;        //A通道电流转换系数
    uint16_t U16_RMSIBC_RegData;        //B通道电流转换系数
    uint16_t U16_RMSUC_RegData;         //电压通道转换系数
    uint16_t U16_PowerPAC_RegData;      //A通道功率转化系数
    uint16_t U16_PowerPBC_RegData;      //B通道功率转化系数
    uint16_t U16_PowerSC_RegData;       //视在功率转化系数，if A通道，则是A通道视在转换系数，AB二选其一
    uint16_t U16_EnergyAC_RegData;      //A通道有功电能转换系数
    uint16_t U16_EnergyBC_RegData;      //B通道有功电能转换系数
    uint16_t U16_CheckSUM_RegData;      //转换系数checksum
    uint16_t U16_CheckSUM_Data;         //转换系数计算出的Checksum
    uint16_t U16_HFConst_RegData;
    uint16_t U16_Check_SysconReg_Data;
    uint16_t U16_Check_EmuconReg_Data;
    uint16_t U16_Check_Emucon2Reg_Data;

    uint32_t U32_RMSU_RegData;          //电压有效值寄存器
    
    uint32_t U32_RMSIA_RegData;         //A通道电流有效值寄存器
    uint32_t U32_POWERPA_RegData;       //A通道功率有效值寄存器
    uint32_t U32_ENERGY_PA_RegData;     //A通道有功电能有效值寄存器

    uint32_t U32_RMSIB_RegData;         //B通道电流有效值寄存器
    uint32_t U32_POWERPB_RegData;       //B通道功率有效值寄存器
    uint32_t U32_ENERGY_PB_RegData;     //B通道有功电能有效值寄存器


    float F_AC_BACKUP_E;                //A通道电量备份
    float F_BC_BACKUP_E;                //B通道电量备份

    uint8_t current_channel;
    uint8_t serial_tx_buf[10];          //串口数据发送
    uint8_t serial_rx_buf[10];
    int tx_lenth;
    int rx_lenth;

    //pthread_mutex_t mutex_lwx8110;

    float   F_AC_V;								
    float   F_AC_I;												
    float   F_AC_P;										
    float   F_AC_E;																     	
    float   F_AC_PF;									
    float	F_Angle;												

    float   F_AC_I_B;									
    float   F_AC_P_B;												
    float 	F_AC_E_B;												
    float   F_AC_BACKUP_E_B;								   
    float   F_AC_LINE_Freq;     
    int     F_AC_status;		
    			
}LowConf;



float hlw8110_read_Angle(LowConf *conf);
float hwl8110_read_PF(LowConf *conf);
float hwl8110_read_LineFreq(LowConf *conf);
float hwl8110_read_EA(LowConf *conf);
float hwl8110_read_PA(LowConf *conf);
float hlw8110_read_IA(LowConf *conf);
float hlw8110_read_UV(LowConf *conf);
int hlw8110_read_Status(LowConf* conf,int* nStatus);

LowConf * hlw8110_init(void);
void hlw8110_deinit(LowConf *conf);
LowConf* hlw8110_Reset(LowConf *conf);

#endif