SmartPDCode/f407/applications/board.h

/*
 * Copyright (c) 2006-2024, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2024-11-20     RealThread   first version
 */

#ifndef __BOARD_H__
#define __BOARD_H__

#include <rtconfig.h>
#include <stm32f4xx.h>
#include <drv_common.h>


#ifdef __cplusplus
extern "C"
{
#endif

/*-------------------------- CHIP CONFIG BEGIN --------------------------*/

#define CHIP_FAMILY_STM32
#define CHIP_SERIES_STM32F4
#define CHIP_NAME_STM32F407ZG

/*-------------------------- CHIP CONFIG END --------------------------*/

/*-------------------------- ROM/RAM CONFIG BEGIN --------------------------*/

#define ROM_START              ((uint32_t)0x08000000)
#define ROM_SIZE               (1024 * 1024)
#define ROM_END                ((uint32_t)(ROM_START + ROM_SIZE))

#define RAM1_START             (0x20000000)
#define RAM1_SIZE              (128 * 1024)
#define RAM1_END               (RAM1_START + RAM1_SIZE)

#define RAM2_START             (0x10000000)
#define RAM2_SIZE              (64 * 1024)
#define RAM2_END               (RAM2_START + RAM2_SIZE)

#define BSP_CLOCK_SOURCE                  ("HSI")
#define BSP_CLOCK_SOURCE_FREQ_MHZ         ((int32_t)0)
#define BSP_CLOCK_SYSTEM_FREQ_MHZ         ((int32_t)168)


//On-chip Peripheral Drivers
#define BSP_USING_GPIO
#define BSP_USING_UART

#ifdef BOARD_EVB_ATK
    #define BSP_USING_UART1
    #define BSP_UART1_TX_PIN            "PA9"
    #define BSP_UART1_RX_PIN            "PA10"
    #define BSP_UART1_RX_BUFSIZE        1024
    #define BSP_UART1_TX_BUFSIZE        1024

    #define BSP_USING_UART2
    #define BSP_UART2_TX_PIN            "PA2"
    #define BSP_UART2_RX_PIN            "PA3"
    #define BSP_UART2_RX_BUFSIZE        1024
    #define BSP_UART2_TX_BUFSIZE        1024
    #define BSP_UART2_RX_USING_DMA
    #define BSP_UART2_TX_USING_DMA
    
    #define BSP_USING_UART3
    #define BSP_UART3_TX_PIN            "PB10"
    #define BSP_UART3_RX_PIN            "PB11"
    #define BSP_UART3_RX_BUFSIZE        1024
    #define BSP_UART3_TX_BUFSIZE        1024
    #define BSP_UART3_RX_USING_DMA
    #define BSP_UART3_TX_USING_DMA
#else
    #define BSP_USING_UART1
    #define BSP_UART1_TX_PIN            "PA9"
    #define BSP_UART1_RX_PIN            "PA10"
    #define BSP_UART1_RX_BUFSIZE        1024
    #define BSP_UART1_TX_BUFSIZE        1024

    #define BSP_USING_UART2
    #define BSP_UART2_TX_PIN            "PA2"
    #define BSP_UART2_RX_PIN            "PA3"
    #define BSP_UART2_RX_BUFSIZE        1024
    #define BSP_UART2_TX_BUFSIZE        1024
    //#define BSP_UART2_RX_USING_DMA
    //#define BSP_UART2_TX_USING_DMA
    
    #define BSP_USING_UART3
    #define BSP_UART3_TX_PIN            "PB10"
    #define BSP_UART3_RX_PIN            "PB11"
    #define BSP_UART3_RX_BUFSIZE        1024
    #define BSP_UART3_TX_BUFSIZE        1024
    //#define BSP_UART3_RX_USING_DMA
    //#define BSP_UART3_TX_USING_DMA
    
    #define BSP_USING_UART6
    #define BSP_UART6_TX_PIN            "PC6"
    #define BSP_UART6_RX_PIN            "PC7"
    #define BSP_UART6_RX_BUFSIZE        1024
    #define BSP_UART6_TX_BUFSIZE        1024
    //#define BSP_UART6_RX_USING_DMA
    //#define BSP_UART6_TX_USING_DMA
#endif

//#define BSP_USING_I2C2
#define BSP_I2C2_SCL_PIN 16
#define BSP_I2C2_SDA_PIN 91

#define RT_USING_USB_HOST
#define BSP_USING_USBH
#define BSP_USING_WDT
#define BSP_USING_ETH

#define BSP_USING_SDIO


#define BSP_USING_SPI
//#define BSP_USING_SPI1

#define BSP_USING_SDCARD

#define PHY_USING_YT8512C

#define BSP_RTC_USING_LSE
#define BSP_USING_ONCHIP_RTC


/*#define BSP_USING_ON_CHIP_FLASH*/

#ifdef __cplusplus
}
#endif

#endif /* __BOARD_H__ */