SmartPDCode/truring_ctrl_upgrade/PDU-AC_ADA_NEW/user/board_cfg.h

/*********************************************************************************************************
* Module   : board_cfg
* Abstract : controller board expecil configuration !!!! 
* Version  : 1.0.0
* Author   : Leopul(COPYRIGHT 2025 ~ 2027 Leopul. All rights reserved.)
* Complete : 2025-02-16
* Content  : None
* Note     : None
*********************************************************************************************************/


#ifndef __BOARD_CFG_H_
#define __BOARD_CFG_H_




#define OPEN_WATCH_DOG  				0
#define OPEN_NOT_READ_EN				0




#define  POWER_DC           0
#define  POWER_AC           1
#define  POWER_AC_3_3       4
#define  POWER_AC_3_1       2
#define  POWER_AC_3_2       3


#define  INPUT_PT_NONE      0			/* detect module count */
#define  INPUT_PT_1         1
#define  INPUT_PT_2         2
#define  INPUT_PT_3         3

#define  ZERO_LINE_CTRL_NO       0
#define  ZERO_LINE_CTRL_YES      1




#define OUTPUT_CTRL_NO         0      /*  */
#define OUTPUT_CTRL_YES        1




#define DEIVECE(elec_type,input_pt,ctrl_zero_flag,zero_count,ctrl_output_flag,relay_count) ((elec_type        << 12)\
																																													 |(input_pt         << 10)\
																																													 |(ctrl_zero_flag   << 9)\
																																													 |(zero_count       << 7)\
																																													 |(ctrl_output_flag << 6)\
																																													 |relay_count)
																																													 																																						 
#define PT_SUB_COUNT_3             3
#define PT_SUB_COUNT_4             4

#define   PRJ_8_NEW									0
#define   PRJ_3_4                   0
#define   PRJ_3_2                   0
#define 	PRJ_DC_8									0
#define   PRJ_6_NEW                 1
#define   PRJ_3_NEW                 0
#define 	PRJ_5_NEW									0
#define 	PRJ_4_SELF_LOCK       	  0
#define   PRJ_4_BASE                0
#define   PRJ_1_BASE                0
#define 	PRJ_1_SELF_LOCK       	  0

#define   PRJ_1_ALL_MON             0

#if PRJ_8					
	#define   POWER_TYPE                (POWER_AC)
	#define   INPUT_PT_NUM              (INPUT_PT_2)
	#define   ZERO_CONTRL               (ZERO_LINE_CTRL_NO)
	#define   ZERO_CTRL_NUM             (ZERO_LINE_NONE)
	#define   OUTPUT_CONTRL             (OUTPUT_CTRL_YES)
	#define 	RelaySlaveChaNum 					8
	#define 	RELAY_REMENBER						1
	#define   SURPPORT_2_PT             0
	#define 	SUPPORT_ALL_ON_OFF        0
	#define   PT_SUB_COUNT              (PT_SUB_COUNT_4)
	#define 	ACSingCurrid 							1 
	
#elif PRJ_6_NEW
	#define 	RelaySlaveChaNum 					6
	#define 	ACSingCurrid 							1 
	#define   SURPPORT_2_PT             1
	#define   PT_SUB_COUNT              (PT_SUB_COUNT_3)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
#elif PRJ_8_NEW
	#define 	RelaySlaveChaNum 					8
	#define 	ACSingCurrid 							1 
	#define   SURPPORT_2_PT             1
	#define   PT_SUB_COUNT              (PT_SUB_COUNT_4)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
#elif PRJ_3_NEW
	#define 	RelaySlaveChaNum 					3
	#define 	ACSingCurrid 							2 
	#define   SURPPORT_2_PT             0
	#define   PT_SUB_COUNT              (RelaySlaveChaNum)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
	#define   SUPPORT_4_ON_FLASH        1
	#define   SUPPORT_ALL_ON_OFF    		1
#elif PRJ_5_NEW
	#define 	RelaySlaveChaNum 					5
	#define 	ACSingCurrid 							1 
	#define   SURPPORT_2_PT             0
	#define   PT_SUB_COUNT              (RelaySlaveChaNum)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
#elif PRJ_4_SELF_LOCK
	#define 	RelaySlaveChaNum 					4
	#define 	ACSingCurrid 							2 
	#define   SURPPORT_2_PT             0
	#define   PT_SUB_COUNT              (RelaySlaveChaNum)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
	#define   SUPPORT_SELF_LOCK         1
#elif PRJ_4_BASE
	#define 	RelaySlaveChaNum 					4
	#define 	ACSingCurrid 							2 
	#define   SURPPORT_2_PT             0
	#define   PT_SUB_COUNT              (RelaySlaveChaNum)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
	#define   SUPPORT_ALL_ON_OFF    		1
#elif PRJ_1_BASE              
	#define 	RelaySlaveChaNum 					1
	#define 	ACSingCurrid 							2 
	#define   SURPPORT_2_PT             0
	#define   PT_SUB_COUNT              (RelaySlaveChaNum)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
#elif PRJ_1_SELF_LOCK
	#define 	RelaySlaveChaNum 					1
	#define 	ACSingCurrid 							2 
	#define   SURPPORT_2_PT             0
	#define   PT_SUB_COUNT              (RelaySlaveChaNum)
	#define   SUPPORT_DETECTION         1
	#define   SUPPORT_RELAY_REMENBER		1
	#define   SUPPORT_SELF_LOCK         1
	
#elif PRJ_1_ALL_MON         
	#define 	RelaySlaveChaNum 					1
	#define 	ACSingCurrid 							2 
	#define   SURPPORT_2_PT             0
	#define   PT_SUB_COUNT              (RelaySlaveChaNum)
	#define   SUPPORT_MON               1
#endif


#endif