SmartPDCode/control/PDU-AC_ADA_OLD8/common/common.h

/*********************************************************************************************************
* Module   : common
* Abstract : defined data structure! 
* Version  : 1.0.0
* Author   : Leopul(COPYRIGHT 2025 ~ 2027 Leopul. All rights reserved.)
* Complete : 2025-02-16
* Content  : None
* Note     : None
*********************************************************************************************************/

#ifndef _COMMON_H_
#define _COMMON_H_


#include "stdint.h"
#include "board_cfg.h"



#define START_R_REGISTER            			4000

#define DEVICE_ID_LEN                     1

#define ELE_DATA                          4011
#define ELE_DATA_LEN                      (12 * RelaySlaveChaNum)

#define RELAY_STATE                       4209
#define RELAY_STATE_LEN                   (RelaySlaveChaNum)

#define CHANNEL_ALL_CONSUMER              4250
#define CHANNEL_ALL_CONSUMER_LEN          (2 * RelaySlaveChaNum)


#define DETECTION                         4310
#define DETECTION_LEN                       1


#define INFOMATION                         (4360)



#define OPEN_DELAY                         (4500)
#define OPEN_DELAY_LEN                     (RelaySlaveChaNum)


#define CLOSE_DELAY                        (4518)
#define CLOSE_DELAY_LEN                    (RelaySlaveChaNum)

#define SET_STATE                          (4586)
#define SET_STATE_LEN                      (RelaySlaveChaNum)

#define VALUE_THR                          (4629)
#define VALUE_THR_LEN                      (RelaySlaveChaNum*2*8)

#define CHANNEL_FUNC                       (5100)
#define CHANNEL_FUNC_LEN                   (RelaySlaveChaNum)


#define CLEAR_CONSUMER                     (5120)
#define CLEAR_CONSUMER_LEN                 (RelaySlaveChaNum)

#define CLEAR_CONSUMER_ALL                 (5128)


#define TOTAL_THR                           (5200)
#define TOTAL_THR_LEN                       (16)

#define TOTAL_CHANNEL_FUNC                  (5250)

#define BREAKE_UPGRATE                       (5260)








#define START_R_LENTH             				(250)



#define START_RW_REGISTER         				(START_R_REGISTER + START_R_LENTH)


#define START_RW_LENTH            				(350)


#define START_W_REGISTER          				(START_RW_REGISTER+START_RW_LENTH)

#define START_W_LENTH             				(100)




//#define 



#define MAX_CHANNEL              	9
#define MAX_INPUT_CAHNNEL         3
#define VERSION_LENTH            	6
#define DATA_LENTH               	16










#define VOLTAGE_MAX     									(1 << 0)
#define VOLTAGE_MIN     									(1 << 1)
#define CURRENT_MAX                       (1 << 2)
#define POWER_MAX													(1 << 3)
#define CONSUMER_MAX                      (1 << 4)
#define FREQ_MAX                          (1 << 5)
#define FREQ_MIN                          (1 << 6)


#define VOLTAGE_MAX_EN     									VOLTAGE_MAX
#define VOLTAGE_MIN_EN     									VOLTAGE_MIN
#define CURRENT_MAX_EN                      CURRENT_MAX
#define POWER_MAX_EN												POWER_MAX
#define CONSUMER_MAX_EN                     CONSUMER_MAX
#define FREQ_MAX_EN                         FREQ_MAX
#define FREQ_MIN_EN                         FREQ_MIN

#define VOL_MAX_OVER_FUNC										VOLTAGE_MAX
#define VOL_MIN_OVER_FUNC										VOLTAGE_MIN
#define CUR_MAX_OVER_FUNC                   CURRENT_MAX
#define POW_MAX_OVER_FUNC                   POWER_MAX
#define CON_MAX_OVER_FUNC                   CONSUMER_MAX
#define FREQ_MAX_OVER_FUNC                  FREQ_MAX
#define FREQ_MIN_OVER_FUNC                  FREQ_MIN





#define VOLTAGE_MAX_DIS_EN									(~(VOLTAGE_MAX_EN))
#define VOLTAGE_MIN_DIS_EN									(~(VOLTAGE_MIN_EN))
#define CURRENT_MAX_DIS_EN									(~(CURRENT_MAX_EN))
#define POWER_MAX_DIS_EN                    (~(POWER_MAX_EN))
#define CONSUMER_MAX_DIS_EN                 (~(CONSUMER_MAX_EN))
#define FREQ_MAX_DIS_EN                     (~(FREQ_MAX_EN))
#define FREQ_MIN_DIS_EN                     (~(FREQ_MIN_EN))


#define IS_VOLTAGE_MAX_EN(reg)           		((reg) & VOLTAGE_MAX_EN)
#define IS_VOLTAGE_MIN_EN(reg)           		((reg) & VOLTAGE_MIN_EN)
#define IS_CURRENT_MAX_EN(reg)           		((reg) & CURRENT_MAX_EN)
#define IS_POWER_MAX_EN(reg)           			((reg) & POWER_MAX_EN)
#define IS_CONSUMER_MAX_EN(reg)           	((reg) & CONSUMER_MAX_EN)
#define IS_FREQ_MAX                       	((reg) & FREQ_MAX_EN)
#define IS_FREQ_MIN                       	((reg) & FREQ_MIN_EN)


#define   SET_VOLTAGE_MAX_EN(reg)        		((reg) |= VOLTAGE_MAX_EN)
#define   SET_VOLTAGE_MIN_EN(reg)        		((reg) |= VOLTAGE_MIN_EN)
#define   SET_CURRENT_MAX_EN(reg)        		((reg) |= CURRENT_MAX_EN)
#define   SET_POWER_MAX_EN(reg)        			((reg) |= POWER_MAX_EN)
#define   SET_CONSUMER_MAX_EN(reg)        	((reg) |= CONSUMER_MAX_EN)
#define   SET_FREQ_MAX_EN(reg)        			((reg) |= FREQ_MAX_EN)
#define   SET_FREQ_MIN_EN(reg)        			((reg) |= FREQ_MIN_EN)


#define   UNSET_VOLTAGE_MAX_EN(reg)        	((reg) &= VOLTAGE_MAX_DIS_EN)
#define   UNSET_VOLTAGE_MIN_EN(reg)        	((reg) &= VOLTAGE_MIN_DIS_EN)
#define   UNSET_CURRENT_MAX_EN(reg)        	((reg) &= CURRENT_MAX_DIS_EN)
#define   UNSET_POWER_MAX_EN(reg)        		((reg) &= POWER_MAX_DIS_EN)
#define   UNSET_CONSUMER_MAX_EN(reg)        ((reg) &= CONSUMER_MAX_DIS_EN)
#define   UNSET_FREQ_MAX_EN(reg)        		((reg) &= FREQ_MAX_DIS_EN)
#define   UNSET_FREQ_MIN_EN(reg)        		((reg) &= FREQ_MIN_DIS_EN)


#define  SET_WANNING_VOLTAGE_MAX(reg)       ((reg) |= VOLTAGE_MAX)
#define  SET_WANNING_VOLTAGE_MIN(reg)       ((reg) |= VOLTAGE_MIN)
#define  SET_WANNING_CURRENT_MAX(reg)       ((reg) |= CURRENT_MAX)
#define  SET_WANNING_POWER_MAX(reg)         ((reg) |= POWER_MAX)
#define  SET_WANNING_CONSUMER_MAX(reg)      ((reg) |= CONSUMER_MAX)
#define  SET_WANNING_FREQ_MAX(reg)       		((reg) |= FREQ_MAX)
#define  SET_WANNING_FREQ_MIN(reg)       		((reg) |= FREQ_MIN)


#define  UNSET_WANNING_VOLTAGE_MAX(reg)       ((reg) &= (~VOLTAGE_MAX))
#define  UNSET_WANNING_VOLTAGE_MIN(reg)       ((reg) &= (~VOLTAGE_MIN))
#define  UNSET_WANNING_CURRENT_MAX(reg)       ((reg) &= (~CURRENT_MAX))
#define  UNSET_WANNING_POWER_MAX(reg)         ((reg) &= (~POWER_MAX))
#define  UNSET_WANNING_CONSUMER_MAX(reg)      ((reg) &= (~CONSUMER_MAX))
#define  UNSET_WANNING_FREQ_MAX(reg)       		((reg) &= (~FREQ_MAX))
#define  UNSET_WANNING_FREQ_MIN(reg)       		((reg) &= (~FREQ_MIN))





#define  IS_OVERFUNC_VOLTAGE_MAX(reg)       ((reg) & VOL_MAX_OVER_FUNC)
#define  IS_OVERFUNC_VOLTAGE_MIN(reg)				((reg) & VOL_MIN_OVER_FUNC)
#define  IS_OVERFUNC_CURRENT_MAX(reg)				((reg) & CUR_MAX_OVER_FUNC)	
#define  IS_OVERFUNC_POWER_MAX(reg)					((reg) & POW_MAX_OVER_FUNC)	
#define  IS_OVERFUNC_CONSUMER_MAX(reg)      ((reg) & CON_MAX_OVER_FUNC) 
#define  IS_OVERFUNC_FREQ_MAX(reg)          ((reg) & FREQ_MAX_OVER_FUNC) 
#define  IS_OVERFUNC_FREQ_MIN(reg)    			((reg) & FREQ_MIN_OVER_FUNC)



// EEPROM 
#define EEPROM_RELAY_STARTUS_ADDR          		(0)
#define EEPROM_RELAY_BYTES                		(2)
#define EEPROM_RELAY_COUNT_MAX            		(64)         /* 2 page */

#define EEPROM_DELAY_ADDR                     (64)
#define EEPROM_DELAY_BYTES                		(2)
#define EEPROM_DELAY_COUNT_MAX                (64)				 /* 2 page */


#define EEPROM_THRESHOLD_INPUT_ADDR           (128)
#define EEPROM_THRESHOLD_INPUT_BYTES          (4)
#define EEPROM_THRESHOLD_INPUT_MAX            (64)					/* 2 page */

#define EEPROM_THRESHOLD_OUTPUT_ADDR          (192)
#define EEPROM_THRESHOLD_OUTPUT_BYTES         (4)
#define EEPROM_THRESHOLD_OUTPUT_MAX           (256)         /* 8 page */

#define EEPROM_INPUT_OVER_FUNC_ADDR           (448)
#define EEPROM_INPUT_OVER_FUNC_BYTES          (2)
#define EEPROM_INPUT_OVER_FUNC_MAX            (32)					/* 1 page */


#define EEPROM_OUTPUT_OVER_FUNC_ADDR          (480)      
#define EEPROM_OUTPUT_OVER_FUNC_BYTES         (2)
#define EEPROM_OUTPUT_OVER_FUNC_MAX           (32)          /* 1 page */





#define EEPROM_DEVICES_ADDR                   (0)				//device signal
#define EEPROM_DEVICES_LENTH                  (2)


#define EEPROM_STATUS_ADDR                    (64)			// one page
#define EEPROM_STATUS_LENTH                   (16*2)


#define EEPROM_OTHER_ADDR                     (128)
#define EEPROM_OTHER_LENTH                    (32*30)   // 30 page    


#define EEPROM_CHANNEL_PHASE                  (2048)
#define EEPROM_CHANNEL_LENTH                  (9)


//#define EEPROM_CHN_CTRL                       (2080)
//#define EEPROM_CHN_CTRL_LENTH                 (32)     //one page

#define CONSUM_PAGE                           (64)
#define MAX_ROW                               (40)

#define EEPROM_CONSUMER_ADDR                  (3072)
#define EEPROM_CONSUMER_ADDR_LEN              (CONSUM_PAGE*MAX_ROW)


#define THRESHOLD_IN             							0
#define THRESHOLD_OUT            							1


#define ELE_INPUT                             0
#define ELE_OUTPUT                            1

#define AC3PPDU_Lack_Voltage			(30000)


#define Default_Consum_Max   (4000000000)
#define Default_Voltage_Max  (1000000000)
#define Default_Current_Max  (1000000000)
#define Default_Power_Max		 (1000000000)

#define THRESHOULD_JUDGMENT    		(50)





/* relay controller */
#define RL_STATUS                             (1 << 0)
#define RL_COUNTER_END_FLAG            				(1 << 1)
#define RL_COUNTER_BEGIN_FLAG         				(1 << 2)
#define RL_ORDER_FLAG                  				(1 << 3)
#define RL_ON_FLAG                     				(1 << 4)
#define RL_OFF_FLAG                    				(1 << 5)
#define RL_ON_DELAY_FLAG               				(1 << 6)
#define RL_OFF_DELAY_FLAG              				(1 << 7)

#define GET_RL_STATUS(reg)                       (reg & (RL_STATUS))    
#define IS_RL_ORDER_FLAG_EN(reg)  						   (reg & RL_ORDER_FLAG)
#define IS_RL_COUNTER_END_FLAG_EN(reg)					 (reg & RL_COUNTER_END_FLAG)
#define IS_RL_COUNTER_BEGINE_FLAG_EN(reg)        (reg & RL_COUNTER_BEGIN_FLAG)
#define IS_RL_ON_FLAG_EN(reg) 									 (reg & RL_ON_FLAG)
#define IS_RL_OFF_FLAG_EN(reg) 									 (reg & RL_OFF_FLAG)
#define IS_RL_ON_DELAY_FLAG_EN(reg) 						 (reg & RL_ON_DELAY_FLAG)
#define IS_RL_OFF_DELAY_FLAG_EN(reg) 						 (reg & RL_OFF_DELAY_FLAG)


#define SET_RL_STATUS(reg,value)                  ((reg) = ((value) ? ((reg) | 1) : ((reg) & (~1))))

#define SET_RL_ORDER_FLAG(reg)                   (reg |= RL_ORDER_FLAG)
#define SET_RL_COUNTER_END_FLAG(reg)             (reg |= RL_COUNTER_END_FLAG)
#define SET_RL_COUNTER_BEGIN_FLAG(reg)          (reg |= RL_COUNTER_BEGIN_FLAG )
#define SET_RL_ON_FLAG(reg)                      (reg |= RL_ON_FLAG)
#define SET_RL_OFF_FLAG(reg)                     (reg |= RL_OFF_FLAG)
#define SET_RL_ON_DELAY_FLAG(reg)                (reg |= RL_ON_DELAY_FLAG)
#define SET_RL_OFF_DELAY_FLAG(reg)               (reg |= RL_OFF_DELAY_FLAG)


#define CLEAR_RL_ORDER_FLAG(reg)                     (reg &= (~(RL_ORDER_FLAG)))
#define CLEAR_RL_COUNTER_END_FLAG(reg)               (reg &= (~(RL_COUNTER_END_FLAG)))
#define CLEAR_RL_COUNTER_BEGIN_FLAG(reg)            (reg &= (~(RL_COUNTER_BEGIN_FLAG)))
#define CLEAR_RL_ON_FLAG(reg)                        (reg &= (~(RL_ON_FLAG)))
#define CLEAR_RL_OFF_FLAG(reg)                       (reg &= (~(RL_OFF_FLAG)))
#define CLEAR_RL_ON_DELAY_FLAG(reg)                  (reg &= (~(RL_ON_DELAY_FLAG)))
#define CLEAR_RL_OFF_DELAY_FLAG(reg)                 (reg &= (~(RL_OFF_DELAY_FLAG))) 



enum{
	DELAY_CTRL = 0,
	PROMPT_CTRL,
};
enum{
	STM32_ADC_V_1 = 0,
	STM32_ADC_V_2,
};


#pragma pack (2)
typedef struct {
	uint32_t uniq_3;
	uint32_t uniq_2;
	uint32_t uniq_1;
	uint32_t dev_chn;
	uint16_t version[6];
	uint16_t date[16];
	uint64_t keep_running_time;    
}board_info_t;


typedef struct {
	uint32_t voltage;
	uint32_t current;
	uint32_t power;
	uint32_t freq;
	uint32_t consumer;
	uint32_t factor;
}old_ele_info_t;

typedef struct	
{
	uint16_t    	state						:1;       	 
	uint16_t 			v_top_en				:1;             
	uint16_t 			v_top_wanning		:1;           
	uint16_t 			v_down_en				:1;           
	uint16_t 			v_down_wanning  :1;         
	uint16_t 			c_top_en        :1;             
	uint16_t 			c_top_wanning   :1;           
	uint16_t 			p_top_en        :1;             
	uint16_t 			p_top_wanning   :1;           
	uint16_t 			e_top_en				:1;             
	uint16_t 			e_top_wanning   :1;
	uint16_t    									:5;
}old_state_t; 


typedef uint32_t old_consumer_t;


typedef struct {
	old_ele_info_t ele_info[8];
}ac_ele_t;

typedef struct {
	old_state_t state[8];
}ac_state_t;


typedef struct {
	old_consumer_t consumer[8];
}ac_consumer_t;


typedef uint32_t ac_total_consumer_t;

typedef struct{
	uint16_t          i_max_func    :      1;
	uint16_t          v_max_func    :      1;
	uint16_t          v_min_func    :      1;
	uint16_t          p_max_func    :      1;
	uint16_t          c_max_func    :      1;
	uint16_t                        :      3;
}ac_over_func_t;






typedef struct{
	uint16_t         total_v_wanning_max     :   1;
	uint16_t         total_v_wanning_min     :   1;
	uint16_t         total_i_wanning_max     :   1;
	uint16_t         total_p_waning_max      :   1;
	uint16_t         total_c_waning_max      :   1;
	uint16_t                        			:      3;
}total_waning_t;




typedef struct {
		uint32_t uniq_ID_64_95;
		uint32_t uniq_ID_32_63;
		uint32_t uniq_ID_00_31;
    int  channels;
		char ver[12];
    char date[32];
		uint64_t  runing_time;
}ac_information_t;





typedef struct {
	uint16_t delay_open[8];
}ac_delay_open_t;

typedef struct {
	uint16_t delay_close[8];
}ac_delay_close_t;



typedef struct {
	uint32_t v_top;
	uint32_t v_down;
	uint32_t i_top;
	uint32_t i_down;
	uint32_t p_top;
	uint32_t p_down;
	uint32_t e_top;
	uint32_t e_down;
}thr_t;



typedef struct {
	thr_t  th[8];
}ac_thr_t;

typedef  thr_t all_thr_t;
//typedef  uint16_t  all_over_func_t; 






typedef struct {
	uint16_t 						     dev_chn;
	ac_ele_t  						    ac_ele;
	ac_state_t  					     state;
	ac_consumer_t 			    consumer;
	uint32_t          total_sonsumer;
	uint16_t      		 		 detection;
	total_waning_t     total_wanning;
	ac_information_t            info;
}ac_r_data_t;





typedef struct{
	ac_delay_open_t 				open;
	ac_delay_close_t  		 close;
	ac_thr_t                 thr;
	all_thr_t          totol_thr;
	ac_over_func_t     over_func[8];
}ac_rw_data_t;






typedef struct {
	uint32_t voltage;
	uint32_t current;
	uint32_t power;
	uint32_t consumer;
	uint16_t freq;
	uint16_t factor;
	uint16_t wanning;
	uint16_t resever;
}elect_info_t;





typedef struct{
	elect_info_t info[3];
}elect_3_info_t;


typedef struct {
	uint16_t delay_open;
	uint16_t delay_close;
}delay_t;

typedef struct{
	uint32_t th_voltage_max;
	uint32_t th_voltage_min;
	uint32_t th_current_max;
	uint32_t th_power_max;
	uint32_t th_consumer_max;
	uint32_t reserve1;
	uint32_t reserve2;
}threshold_t;



typedef struct {
	uint16_t 						dev_chn;
	board_info_t				b_info;
	elect_3_info_t      ele_3_in;
	elect_info_t        ele_out[MAX_CHANNEL];
	uint16_t            detection;
	uint16_t            wanning_lock_L1;
	uint16_t            wanning_lock_L2;
	uint16_t            wanning_lock_L3; 
}r_data_t;




typedef struct {
	uint16_t            relay_status[MAX_CHANNEL];
	uint16_t            combin_relay_status[4];
	uint16_t            zero_relay_status[3];
	delay_t             delay_chn[MAX_CHANNEL];
  delay_t             combin_chn[4];
	delay_t             zero_chn[3];
	threshold_t         th_in[MAX_INPUT_CAHNNEL];
	threshold_t         th_out[MAX_CHANNEL];
	threshold_t         th_combin_out[4];
	uint16_t            over_fun_in[3];
	uint16_t            over_func_out[MAX_CHANNEL];
	uint16_t            combin_over_func[4];
	uint16_t            chn_ctrl[MAX_CHANNEL];
	#define            	CTRL_YES    			0
	#define             CTRL_HARD_OPEN    1
	#define             CTRL_HARD_CLOSE   2
}rw_data_t;


typedef union{
	uint16_t data[START_R_LENTH];
	r_data_t r_d;
}mod_bus_r;

typedef union{
	uint16_t 	data[START_RW_LENTH];
	rw_data_t rw_d;
}mod_bus_rw;

typedef struct {
	//mod_bus_r r_data;
	//mod_bus_rw rw_data;
	ac_r_data_t  	 r_data;
	ac_rw_data_t  rw_data;
}mod_data_t;


typedef struct {
	uint32_t iic_consumer[MAX_CHANNEL];
	uint64_t recode_index1;
}iic_consumer_chache_t;

typedef union{
	uint8_t  data[64];
	iic_consumer_chache_t iic_con;
}iic_data;

typedef union{
	uint8_t 	data[4];
	uint32_t     value;
}Rx_Data;



#pragma pack ()

typedef struct{
	iic_data   iic_da;
	uint64_t   index;
	uint16_t   row;
}consumer_data;


typedef struct {
	uint8_t flag;
	uint16_t start_addr;
	uint16_t lenth;
	uint8_t  data[72];
}eeprom_write_cache_t;


typedef struct {
	uint16_t start_addr;
	uint16_t lenth;
	uint8_t  data[36];
}w_eeprom_data_t;


typedef struct {
#define QUEUE_MAX     25
	uint8_t  front;
	uint8_t  rear;
	w_eeprom_data_t data[QUEUE_MAX];
	uint8_t (*is_empty)(void);
	uint8_t (*is_full)(void);
	uint8_t (*en_queue)(w_eeprom_data_t *d);
	uint8_t (*de_queue)(w_eeprom_data_t *d);
}queue_t;


typedef struct {
	uint8_t fire_or_zero;
#define _FIRE   0
#define _ZERO   1
	uint8_t channel;
	uint16_t *reg;
	uint8_t method;
	uint16_t status;
	uint8_t  w_eep_flag;
#define FLAG_N_W_EEP 0
#define FLAG_W_EEP   1
}async_data;











typedef struct {
	mod_data_t md_data;
	uint8_t 	flag_1s;
	uint8_t	  flag_10s;
	uint8_t   flag_100ms;
	uint8_t   clear_flag; 															/* erase consumer and all successful this flag is 0 */
	uint8_t   out_wanning_en[8];
	uint8_t   in_wanning_en[MAX_INPUT_CAHNNEL];
	uint8_t   in_over_func[3];
	uint8_t   over_func[MAX_CHANNEL];
	uint16_t  relay_staging_staus[MAX_CHANNEL];
	uint16_t  relay_limit_counter[MAX_CHANNEL];
	consumer_data con_da;
	uint32_t ele_restore[MAX_CHANNEL];
	uint8_t   haddr;
	uint8_t   detection_1_value;
	uint32_t  detection_1_count;
	queue_t    q_cache;
#if SURPPORT_2_PT
	uint8_t   detection_2_value;
	uint32_t  detection_2_count;
#endif
#if SUPPORT_SELF_LOCK
	#if (RelaySlaveChaNum >= 1)
		uint8_t 			handle_k_1_status;
		uint8_t  			key_1;
	#endif
	#if (RelaySlaveChaNum >= 2)
		uint8_t 			handle_k_2_status;
		uint8_t 			key_2;
	#endif
	#if (RelaySlaveChaNum >= 3)	
		uint8_t 			handle_k_3_status;
		uint8_t 			key_3;
	#endif
	#if (RelaySlaveChaNum >= 4)
		uint8_t 			handle_k_4_status;
		uint8_t 			key_4;
	#endif
#endif
	
#if RELAY_REMENBER
	uint8_t handle_status[MAX_CHANNEL];  						/* Save the state before the power failure  */
	#if SURPPORT_2_PT
		uint8_t  handle_input_pt[2];										/* recode input status  */
	#else
		uint8_t  handle_input_pt[1];
	#endif
#endif

#if SUPPORT_SELF_LOCK
	#if (RelaySlaveChaNum >= 1)
		void (*read_key_1)();
	#endif
	#if (RelaySlaveChaNum >= 2)
		void (*read_key_2)();
	#endif
	#if (RelaySlaveChaNum >= 3)	
	void (*read_key_3)();
	#endif
	#if (RelaySlaveChaNum >= 4)
	void (*read_key_4)();
	#endif
#endif

	void (*open)(uint8_t channel);
	void (*close)(uint8_t channel);
	void (*read_ele)(uint8_t channel);
	void (*led_flash)(void);
	void (*read_eeprom)(uint16_t addr,uint8_t *r_buff,uint16_t lenth);
	void (*write_eeprom)(uint16_t addr,uint8_t *w_buff,uint16_t lenth);
	void (*check_wanning)(uint8_t in_out, uint8_t channel);
	void (*detection)(void);
	void (*opt_detection)(void);
	void (*erase_consumer)(void);
	void (*opt_overfunc)(uint8_t channel);
	void (*opt_alloverfunc)(uint8_t input);
	void (*break_uboot)(void);
	void (*feed_dog)(void);
	void (*lock)(void);
	void (*unlock)(void);
	void (*check_threshold)(uint8_t in_out,uint8_t channel);
	void (*relay_sync)(void);
	void (*read_eeprom_page)(uint16_t addr,uint8_t *r_buff,uint16_t lenth);
	void (*write_eeprom_page)(uint16_t addr,uint8_t *r_buff,uint16_t lenth);
}board_t;


board_t *get_board(void);
void set_relay_status_async(uint16_t *reg,uint8_t method,uint16_t status);
void read_config_from_eeprom(void);
void reset_config_for_eeprom(void);
void set_relay_sta_async(async_data *data);
#endif