SmartPDCode/control/bootloader/boot/USER/systick.c

/*!
    \file    systick.c
    \brief   the systick configuration file
    
    \version 2024-02-22, V2.1.0, firmware for GD32E23x
*/

/*
    Copyright (c) 2024, GigaDevice Semiconductor Inc.

    Redistribution and use in source and binary forms, with or without modification, 
are permitted provided that the following conditions are met:

    1. Redistributions of source code must retain the above copyright notice, this 
       list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright notice, 
       this list of conditions and the following disclaimer in the documentation 
       and/or other materials provided with the distribution.
    3. Neither the name of the copyright holder nor the names of its contributors 
       may be used to endorse or promote products derived from this software without 
       specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE.
*/

#include "gd32e23x.h"
#include "systick.h"

//volatile static uint32_t delay;

///*!
//    \brief      configure systick
//    \param[in]  none
//    \param[out] none
//    \retval     none
//*/
//void systick_config(void)
//{
//    /* setup systick timer for 1000Hz interrupts */
//		
//    if(SysTick_Config(SystemCoreClock / 1000U)){
//        /* capture error */
//        while(1){
//        }
//    }
//    /* configure the systick handler priority */
//    NVIC_SetPriority(SysTick_IRQn, 0x00U);
//}

///*!
//    \brief      delay a time in milliseconds
//    \param[in]  count: count in milliseconds
//    \param[out] none
//    \retval     none
//*/
//void delay_1ms(uint32_t count)
//{
//    delay = count;

//    while(0U != delay){
//    }
//}

///*!
//    \brief      delay decrement
//    \param[in]  none
//    \param[out] none
//    \retval     none
//*/
//void delay_decrement(void)
//{
//    if(0U != delay){
//        delay--;
//    }
//}
//volatile static uint32_t count_1us = 0;
//volatile static uint32_t count_1ms = 0;
//void systick_config(void)
//{
//	systick_clksource_set(SYSTICK_CLKSOURCE_HCLK_DIV8);
//	nvic_irq_enable(SysTick_IRQn,10);
//	count_1us = (uint32_t)(SystemCoreClock/8000000);
//	count_1ms = (uint32_t)count_1us*1000;
//}

//void delay_us(uint32_t us)
//{
//	uint32_t ctl;
//    
//    /* reload the count value */
//    SysTick->LOAD = (uint32_t)(us * count_1us);
//    /* clear the current count value */
//    SysTick->VAL = 0x0000U;
//    /* enable the systick timer */
//    SysTick->CTRL = SysTick_CTRL_ENABLE_Msk;
//    /* wait for the COUNTFLAG flag set */
//    do{
//        ctl = SysTick->CTRL;
//    }while((ctl&SysTick_CTRL_ENABLE_Msk)&&!(ctl & SysTick_CTRL_COUNTFLAG_Msk));
//    /* disable the systick timer */
//    SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
//    /* clear the current count value */
//    SysTick->VAL = 0x0000U;
//}

//void delay_ms(uint32_t ms)
//{
//	uint32_t ctl;
//    
//    /* reload the count value */
//    SysTick->LOAD = (uint32_t)(ms * count_1ms);
//    /* clear the current count value */
//    SysTick->VAL = 0x0000U;
//    /* enable the systick timer */
//    SysTick->CTRL = SysTick_CTRL_ENABLE_Msk;
//    /* wait for the COUNTFLAG flag set */
//    do{
//        ctl = SysTick->CTRL;
//    }while((ctl&SysTick_CTRL_ENABLE_Msk)&&!(ctl & SysTick_CTRL_COUNTFLAG_Msk));
//    /* disable the systick timer */
//    SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
//    /* clear the current count value */
//    SysTick->VAL = 0x0000U;

//}

static __IO unsigned int s_iTimDelayCnt = 0;

static void TimDelayDec(void); //延时计数

static void TimDelayDec(void)
{
  if(s_iTimDelayCnt != 0) //延时计数器的数值不为0
  {                       
    s_iTimDelayCnt--;     //延时计数器的数值减1
  }
}

void systick_config( void )
{
  if (SysTick_Config(SystemCoreClock / 1000)) //配置系统滴答定时器1ms中断一次  
  { 
    while(1)  //错误发生的情况下，进入死循环
    {
      
    }
  }
}

void SysTick_Handler(void)
{
  TimDelayDec();  //延时计数函数
}


void delay_ms(uint32_t ms)
{
	 s_iTimDelayCnt = ms;       //将延时计数器s_iTimDelayCnt的数值赋为nms
                              
  while(s_iTimDelayCnt != 0)  //延时计数器的数值为0时，表示延时了nms，跳出while语句
  {  
    
  }    
}

void delay_ns(__IO unsigned int nus)    
{
  unsigned int s_iTimCnt = nus;     //定义一个变量s_iTimCnt作为延时计数器，赋值为nus
  unsigned short i;                   //定义一个变量作为循环计数器

  while(s_iTimCnt != 0)    //延时计数器s_iTimCnt的值不为0
  {
    for(i = 0; i < 3; i++) //空循环，产生延时功能
    {
    
    }
    
    s_iTimCnt--;           //成功延时1us，变量s_iTimCnt减1
  }    
}