SmartPDCode/f427/applications/power.h

#ifndef __POWER_Hx__
#define __POWER_Hx__

#include "datadef.h"
#include "lock.h"

#define POWER_AC_GET_INFO                         0x0FA0          //获取继电器板类型通道
#define POWER_AC_CUR_INFO_L                       0x0FAB          //单相小电流继电器信息，共8路继电器
#define POWER_AC_STAT_INFO_L                      0x1071          //单相小电流继电器开关状态，共8路继电器
#define POWER_AC_CUR_INFO_H                       0x1015          //单相大电流继电器信息，共4路继电器
#define POWER_AC_STAT_INFO_H                      0x1083          //单相大电流继电器开关状态，共4路继电器         
#define POWER_AC_TOTAL_ALATRM                     0x10E0          //单相控制板总体报警信息 2024.11.12
#define POWER_AC_OPEN_DELAY_TIME_L                0x1194          //单相小电流继电器板开启延时
#define POWER_AC_CLOSE_DELAY_TIME_L               0x11A6          //单相小电流继电器板关闭延时
#define POWER_AC_OPEN_DELAY_TIME_H                0x11B8          //单相大电流继电器板开启延时
#define POWER_AC_CLOSE_DELAY_TIME_H               0x11C6          //单相大电流继电器板关闭延时
#define POWER_AC_CH_STAT_L                        0x11EA          //设置单相小电流通道开关状态
#define POWER_AC_CH_STAT_H                        0x11FC          //设置单相大电流通道开关状态
#define POWER_AC_THRESHOLD_L                      0x1215          //设置单相小电流通道超限报警阈值
#define POWER_AC_THRESHOLD_H                      0x129F          //设置单相大电流通道超限报警阈值X
#define POWER_AC_KB_VAL_L                         0x1203          //设置单相小电流通道K、B值
#define POWER_AC_KB_VAL_H                         0x124D          //设置单相大电流通道K、B值
#define POWER_AC_RESET_CONSUMP                    0x1400          //重置单相耗电量
#define POWER_AC_ALARM_CTRL                       0x13EC          //超限动作
#define POWER_AC_TOTAL_THRESHOLD                  0x1450          //设置单相总超限报警阈值 2024.11.12
#define POWER_AC_ALARM_CTRL_TOTAL                 0x1482          //总体超限动作   2024.11.12   
#define POWER_AC_BREAKER_INFO                     0x10D6          //单相控制板开关检测信息

#define POWER_DC_SET_STAT                         0x120A          //设置直流继电器开关状态
#define POWER_DC_SET_THRESHOLD                    0x12E9          //设置直流继电器超限报警X
#define POWER_DC_SET_KB_VAL                       0x136D          //设置直流通道K、B值
#define POWER_DC_SET_OPEN_DELAY                   0x11D4          //直流继电器控制板开启延时
#define POWER_DC_SET_CLOSE_DELAY                  0x11DF          //直流继电器控制板关闭延时
#define POWER_DC_SET_OUT_INFO                     0x104F          //直流继电器电路控制板信息，采集一路输出
#define POWER_DC_SET_STAT_INFO                    0x1097          //直流继电器电路控制板开关状态，采集一路输出
#define POWER_DC_SET_IN_INFO                      0x105F          //直流总电流电压采集控制板，采集设备输入电压和输入电流

#define POWER_DC_INFO                             0x1770          //获取直流PDU类型通道
#define POWER_DC_TOTAL_ALARM                      0x1776          //直流PDU总报警信息 2024.11.12
#define POWER_DC_OUT_INFO                         0x177A          //直流PDU输出
#define POWER_DC_STAT_INFO                        0x17E2          //直流PDU开关状
#define POWER_DC_WARNING                          0x179A          //直流PDU报警信息
#define POWER_DC_STAT_ERROR                       0x17E4          //直流PDU故障状态
#define POWER_DC_IN_INFO                          0x1772          //直流PDU采集输入电压与输入电
#define POWER_DC_OPEN_DELAY                       0x17E6          //直流PDU延时
#define POWER_DC_CLOSE_DELAY                      0x17F6          //直流PDU延时
#define POWER_DC_THRESHOLD_VOL_MAX                0x17A2          //max voltage threshold
#define POWER_DC_THRESHOLD_VOL_MIN                0x17B2          //min voltage threshold
#define POWER_DC_THRESHOLD_CUR_MAX                0x17C2          //max current threshold
#define POWER_DC_THRESHOLD_CUR_MIN                0x17D2          //max current threshold
#define POWER_DC_THRESHOLD_POWER_MAX              0x1810          //max power threshold
#define POWER_DC_THRESHOLD_POWERCON_MAX           0x181A          //max powercon threshold
#define POWER_DC_ALL_OPEN_INFO                    0x1806          //ALL OPEN直流PDU开关状
#define POWER_DC_ALL_CLOSE_INFO                   0x1807          //ALL OPEN直流PDU开关状
#define POWER_DC_ALARM_CTRL                       0x182E          //超限动作
#define POWER_DC_CONSUMP_CLEAR   	              0x1838          //重置直流耗电量
#define POWER_DC_THRESHOLD_TOTAL_VOL_MAX          0x184C          //max total voltage threshold 2024.11.12
#define POWER_DC_THRESHOLD_TOTAL_VOL_MIN          0x184D          //min total voltage threshold 2024.11.12
#define POWER_DC_THRESHOLD_TOTAL_CUR_MAX          0x184E          //max total current threshold 2024.11.12
#define POWER_DC_THRESHOLD_TOTAL_PWR_MAX          0x184F          //max total power threshold 2024.11.12
#define POWER_DC_THRESHOLD_TOTAL_PWRCON_MAX       0x1850          //max total powercon threshold 2024.11.12
#define POWER_DC_ALARM_CTRL_TOTAL                 0x1856          //总体超限动作   2024.11.12       

#define POWER_AC3_GET_INFO                        0x1770          //获取三项类型通道
#define POWER_AC3_IN_INFO                         0x1771          //三项交流输入
#define POWER_AC3_OUT_INFO                        0x177D          //三项交流输出
#define POWER_AC3_OUT_ENABLE                      0x182E          //三项交流输出按通道开关状态及控制使能
#define POWER_AC3_NF_STATUS                       0x1837          //三项交流零线断路器状态
#define POWER_AC3_CH_OUT_ENABLE                   0x183A          //三项交流输出按插头开关状态及控制使
#define POWER_AC3_IN_ENABLE                       0x182D          //三项交流输入超限使能
#define POWER_AC3_OUT_ERROR                       0x17DE          //三项交流输出故障状态
#define POWER_AC3_IN_TOTAL_ERROR                  0x17CA          //三项交流总输入故障状态 2024.11.12 
#define POWER_AC3_IN_ERROR                        0x17DD          //三项交流输入故障状态
#define POWER_AC3_OPEN_DELAY_TIME                 0x1840          //三项交流延时
#define POWER_AC3_CLOSE_DELAY_TIME                0x184C          //三项交流延时
#define POWER_AC3_THRESHOLD_IN                    0x17EA          //设置三项交流输入超限报警 
#define POWER_AC3_THRESHOLD_OUT                   0x17EF          //设置三项交流输出超限报警
#define POWER_AC3_ALL_OPEN_INFO                   0x182B          //ALL OPEN直流PDU开关状
#define POWER_AC3_ALL_CLOSE_INFO                  0x182C          //ALL OPEN直流PDU开关状
#define POWER_AC3_THRESHOLD_VOL_MAX               0x17EF          //max voltage threshold
#define POWER_AC3_THRESHOLD_VOL_MIN               0x17FB          //min voltage threshold
#define POWER_AC3_THRESHOLD_CUR_MAX               0x1807          //max current threshold
#define POWER_AC3_THRESHOLD_PWR_MAX               0x1813          //max POWER threshold
#define POWER_AC3_THRESHOLD_PWRCON_MAX            0x181F          //max PWRCON threshold
#define POWER_AC3_ALARM_MISSING_PH                0x1856          //缺相报警
#define POWER_AC3_ALARM_CTRL_TOTAL                0x185F          //总体超限动作 2024.11.12 
#define POWER_AC3_ALARM_CTRL                      0x1860          //超限动作
#define POWER_AC3_RESET_CONSUMP                   0x189C          //重置PH耗电量
#define POWER_AC3_RESET_CONSUMP_ALL               0x18A5          //重置all耗电量
#define POWER_AC3_BREAKER_INFO                    0x17D4          //三相控制板开关检测信息

#define BIT(x)  (1<<x)


enum {
    AC_SINGLE_S_TYPE=1,
    AC_SINGLE_B_TYPE,
    AC_MULTI_S_TYPE,
    AC_MULTI_B_TYPE,
    DC_OUT_TYPE,
    DC_IN_TYPE,
    DCPDU_TYPE,
    TREE_AC_TYPE,   //三相进三项出
		TREE_AC_DUBL,		//双火线
};
enum {
    ENABLE_V_UP         = (1<<1),
    ENABLE_V_DOWN       = (1<<3),
    ENABLE_C_UP         = (1<<5),
    ENABLE_W_UP         = (1<<7),
    ENABLE_P_UP         = (1<<9),
    ENABLE_ALL_UP       = (1<<11),
    ENABLE_ALL_DOWN     = (1<<12),
};

enum {
    ENABLE_AC3_V_UP     = (1<<1),
    ENABLE_AC3_V_DOWN   = (1<<2),
    ENABLE_AC3_C_UP     = (1<<3),
    ENABLE_AC3_W_UP     = (1<<4),
    ENABLE_AC3_P_UP     = (1<<5),
    ENABLE_AC3_STIME    = (1<<6),
    ENABLE_AC3_ETIME    = (1<<7),
};

enum {
    ALARM_V_UP          = (1<<2),
    ALARM_V_DOWN        = (1<<4),
    ALARM_C_UP          = (1<<6), 
    ALARM_W_UP          = (1<<8),
    ALARM_P_UP          = (1<<10),
};

enum {
    THR_V_UPPER=0,
    THR_V_LOWER,
    THR_C_UPPER, 
    THR_P_UPPER,
    THR_W_UPPER,
    THR_MAX,
};

typedef struct 
{
	power_t all;
	power_t all_l[3];
}power_new_total_t;

typedef union{
	uint8_t ph;
	struct{
		uint8_t ph_l;
		uint8_t ph_r;
	}ph2;
}phse_t;


typedef struct{
    char                name[16];
    uint8_t             addr;
    uint8_t             sch;                     //该通道在其所在的板上的序号,程序始于0，用户始于1
    phse_t              pse;
    uint8_t             open_delay;
    uint8_t             close_delay;
		uint8_t             status;
		alarm_all_t         alarm;
}info_new_t;



typedef struct{
    info_new_t              info;
    power_t             power[3];                 //电力信息
    thr_t               thr;                      //阈值
}power_ch_new_t;
typedef struct{
	uint8_t cnt;
	uint8_t addr;
	power_ch_new_t *p_ch;
}board_power_info_t;


typedef struct{
	uint8_t flag;
	board_power_info_t board_new;
}board_status_t;


typedef struct{
		lock_t          				   lck;
		board_status_t             board[33];
		uint8_t         				   chs;
		uint8_t                    brd_cnt;
		uint8_t         				   power_type;
		uint8_t         				   brd_max;
		uint8_t         					 ch_max;
	  power_new_total_t					 total;
		product_data_t             *product;
	  void (*get_board_power_info)(uint8_t addr);
	  void (*get_board_thr_info)(uint8_t addr);
	  void (*get_board_delay_info)(uint8_t addr);
	  void (*set_delay)(uint8_t addr,uint8_t b_addr,uint16_t delay_open, uint16_t delay_close);
	  void (*set_thr)(uint8_t addr,uint8_t b_addr,thr_t *th);
	  void (*set_batch_thr)(uint8_t addr,thr_t *th);
		void (*set_status)(uint8_t addr,uint8_t b_addr,uint8_t status);
	  void (*set_consumer_clear)(uint8_t addr,uint8_t b_addr);
		void (*set_all_status)(uint8_t status);
		void (*set_all_consumer_clear)(uint8_t addr);
		power_ch_new_t      			 *pch;
}power_handle_new_t;




int power_init(void);
int power_deinit(void);

int power_scan(void);
int power_get_ch(uint8_t ch, power_ch_t *pch);

int power_set_ch_sw(uint8_t ch, uint8_t on);
int power_set_ch_sw_n(power_ch_t *pch);
int power_set_board_sw(uint8_t addr, uint8_t on);
int power_set_all_sw(uint8_t on);
int power_set_alarm(power_ch_t *pch);
int power_get_threshold(power_ch_t *pch);
int power_set_threshold(power_ch_t *pch);
int power_set_open_delay(power_ch_t *pch);
int power_set_close_delay(power_ch_t *pch);
int power_reset(void);

power_handle_new_t * power_get_all(void);
int power_data_get(power_handle_new_t *all);
int power_breaker_get(breaker_all_t *all);

int power_data_get_board_cnt();


#endif