SmartPDCode/f427/applications/ui/ssd1309.c

#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include "gpio.h"
#include "lcd.h"
#include "log.h"


void ssd1309_on(lcd_handle_t *h, int flag)
{
    if(flag) {
        lcd_write_reg(h,0x8D);
	    lcd_write_reg(h,0x14);
	    lcd_write_reg(h,0xAF);
    }
    else {
        lcd_write_reg(h,0x8D);
	    lcd_write_reg(h,0x10);
	    lcd_write_reg(h,0xAE);
    }
    return 0;
}

int ssd1309_init(lcd_handle_t *h)
{
    ssd1309_reset();

    lcd_write_reg(h,0xFD);
	lcd_write_reg(h,0x12);
	lcd_write_reg(h,0xAE);//--turn off oled panel
	lcd_write_reg(h,0xd5);//--set display clock divide ratio/oscillator frequency
	lcd_write_reg(h,0xA0);
	lcd_write_reg(h,0xA8);//--set multiplex ratio(1 to 64)
	lcd_write_reg(h,0x3f);//--1/64 duty
	lcd_write_reg(h,0xD3);//-set display offset	Shift Mapping RAM Counter (0x00~0x3F)
	lcd_write_reg(h,0x00);//-not offset
	lcd_write_reg(h,0x40);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
	lcd_write_reg(h,0xA1);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
	lcd_write_reg(h,0xC8);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
	lcd_write_reg(h,0xDA);//--set com pins hardware configuration
	lcd_write_reg(h,0x12);
	lcd_write_reg(h,0x81);//--set contrast control register
	lcd_write_reg(h,0x7F);// Set SEG Output Current Brightness
	lcd_write_reg(h,0xD9);//--set pre-charge period
	lcd_write_reg(h,0x82);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
	lcd_write_reg(h,0xDB);//--set vcomh
	lcd_write_reg(h,0x34);//Set VCOM Deselect Level
	lcd_write_reg(h,0xA4);// Disable Entire Display On (0xa4/0xa5)
	lcd_write_reg(h,0xA6);// Disable Inverse Display On (0xa6/a7)

    ssd1309_refresh(h);
    ssd1309_on(h,1);
	
	return 0;
}

int ssd1309_refresh(lcd_handle_t *h)
{
	int i,n,offset;
    
	for(i=0;i<8;i++) {
	   lcd_write_reg(h,0xb0+i); 			//设置行起始地址
	   lcd_write_reg(h,0x00);   			//设置低列起始地址
	   lcd_write_reg(h,0x10);   			//设置高列起始地址

       gpio_set(DC_GPIO, 1);
       lcd_hw_write(h, &h->buf[i*h->width], h->width);
  	}
}