SmartPDCode/f427/applications/ui/st7789.c

#include "lcd.h"
#include "log.h"


#define DIV_NUM         10

#define COL_ADDR_SET            0x2A
#define ROW_ADDR_SET            0x2B
#define MEMORY_WRITE            0x2C
/**
 * MADCTL(36H):
 * +---------------------------------------+
 * | B7 | B6 | B5 | B4 | B3 | B2 | B1 | B0 |
 * | MY | MX | MV | ML | RGB| MH |  - |  - |
 * +---------------------------------------+
 * [3] 0=RGB,1=BGR
*/
#define DATA_ACCESS             0x36
/**
 * COLMOD(3AH):
 * +---------------------------------------+
 * | B7 | B6 | B5 | B4 | B3 | B2 | B1 | B0 |
 * |  0 | D6 | D5 | D4 |  0 | D2 | D1 | D0 |
 * +---------------------------------------+
 * [6:4] RGB interface Color format:
 *      101=65K RGB
 *      110=262K RGB
 * [2:0] Control interface color format:
 *      011=12bit/pixel
 *      101=16bit/pixel
 *      110=18bit/pixel
 *      111=16M truncated
*/
#define PIXEL_FORMAT            0x3A

#define delay_ms(x)             rt_thread_mdelay(x)

static void st7789_fill(lcd_handle_t *h, uint16_t color);

static void write_reg(lcd_handle_t *h, uint8_t reg)
{
    gpio_set(DC_PIN, 0);
    rt_spi_send(h->dev, &reg, 1);
}
static void write_data(lcd_handle_t *h, uint8_t data)
{
    gpio_set(DC_PIN, 1);
    rt_spi_send(h->dev, &data, 1);
}
static void write_reg_data(lcd_handle_t *h, uint8_t reg, uint16_t data)
{
    write_reg(h,reg);
    write_data(h,data);
}
static void read_data(lcd_handle_t *h, uint8_t *data, int length)
{
    gpio_set(DC_PIN, 1);
    rt_spi_transfer(h->dev, RT_NULL, data, length);
}
static void write_16bit(lcd_handle_t *h, uint16_t data)
{
    uint8_t buf[2];
    
    buf[0] = data >> 8;
    buf[1] = data & 0xff;
    
    gpio_set(DC_PIN, 1);
    rt_spi_send(h->dev, buf, 2);
}

void st7789_rotate(lcd_handle_t *h, int rotate)
{
    switch (rotate)
    {
        case 0:
        //h->width = LCD_W;
        //h->height = LCD_H;
        write_reg_data(h, DATA_ACCESS, (0 << 3) | (0 << 5) | (0 << 6) | (0 << 7)); /* BGR==0,MV==0,MX==0,MY==0 */
        break;
        
        case 90:
        //h->width = LCD_H;
        //h->height = LCD_W;
        write_reg_data(h, DATA_ACCESS, (0 << 3) | (1 << 5) | (1 << 6) | (0 << 7)); /* BGR==0,MV==1,MX==0,MY==1 */
        break;
        
        case 180:
        //h->width = LCD_W;
        //h->height = LCD_H;
        write_reg_data(h, DATA_ACCESS, (0 << 3) | (0 << 5) | (1 << 6) | (1 << 7)); /* BGR==0,MV==0,MX==1,MY==1 */
        break;
        
        case 270:
        //h->width = LCD_H;
        //h->height = LCD_W;
        write_reg_data(h, DATA_ACCESS, (0 << 3) | (1 << 5) | (0 << 6) | (1 << 7)); /* BGR==0,MV==1,MX==0,MY==1 */
        break;
        
        default:
        break;
    }
}

static void st7789_set_win(lcd_handle_t *hd, int x, int y, int w, int h)
{
    write_reg(hd,COL_ADDR_SET);
    write_data(hd,x>>8);
    write_data(hd,x&0xff);
    write_data(hd,(x+w-1)>>8);
    write_data(hd,(x+w-1)&0xff);

    write_reg(hd,ROW_ADDR_SET);
    write_data(hd,y>>8);
    write_data(hd,y&0xff);
    write_data(hd,(y+h-1)>>8);
    write_data(hd,(y+h-1)&0xff);

    write_reg(hd,MEMORY_WRITE);
}



void st7789_refresh(lcd_handle_t *hd, uint16_t x, uint16_t y, uint16_t w, uint16_t h, void *data, uint32_t len)
{
    int r;
    
    st7789_set_win(hd, x, y, x + w - 1, y + h - 1);
    gpio_set(DC_PIN, 1);
    r = rt_spi_send(hd->dev, data, len);
}


static void st7789_reg_init(lcd_handle_t *h)
{
    write_reg(h, DATA_ACCESS);
    write_data(h, 0x00);

    write_reg(h, PIXEL_FORMAT);
    write_data(h, 0X05); //03=RGB444,05=RGB565,06=RGB666

    write_reg(h, 0xB2); //Porch Setting
    write_data(h, 0x0C);
    write_data(h, 0x0C);
    write_data(h, 0X00);
    write_data(h, 0X33);
    write_data(h, 0X33);

    write_reg(h, 0xB7); //Gate Control
    write_data(h, 0x46);

    write_reg(h, 0xBB); //VCOM Setting
    write_data(h, 0x1B);

    write_reg(h, 0xC0); //LCM Control
    write_data(h, 0x2C);

    write_reg(h, 0xC2); //VDV and VRH Command Enable
    write_data(h, 0x01);

    write_reg(h, 0xC3); //VRH set
    write_data(h, 0x0F);

    write_reg(h, 0xC4); //VDV set
    write_data(h, 0x20);

    write_reg(h, 0xC6); //Frame Rate Control
    write_data(h, 0x0F);

    write_reg(h, 0xD0); //Power Control 1
    write_data(h, 0xA4);
    write_data(h, 0xA1);

    write_reg(h, 0xD6);
    write_data(h, 0xA1);

    write_reg(h, 0xE0);   /* set Positive Voltage Gamma */
    write_data(h, 0xF0);
    write_data(h, 0x00);
    write_data(h, 0x06);
    write_data(h, 0x04);
    write_data(h, 0x05);
    write_data(h, 0x05);
    write_data(h, 0x31);
    write_data(h, 0x44);
    write_data(h, 0x48);
    write_data(h, 0x36);
    write_data(h, 0x12);
    write_data(h, 0x12);
    write_data(h, 0x2B);
    write_data(h, 0x34);

    write_reg(h, 0xE1);   /* set Negative Voltage Gamma */
    write_data(h, 0XF0);
    write_data(h, 0X0B);
    write_data(h, 0X0F);
    write_data(h, 0X0F);
    write_data(h, 0X0D);
    write_data(h, 0X26);
    write_data(h, 0X31);
    write_data(h, 0X43);
    write_data(h, 0X47);
    write_data(h, 0X38);
    write_data(h, 0X14);
    write_data(h, 0X14);
    write_data(h, 0X2C);
    write_data(h, 0X32);

    write_reg(h, 0x21); // Dispaly Inversion On

    write_reg(h, 0x29); // Display On

    write_reg(h,MEMORY_WRITE); // Memory Write
}

static void st7789_reset(lcd_handle_t *h)
{
    gpio_set(RST_PIN, 0);        /* LCD Hardware Reset */
    delay_ms(100);
    gpio_set(RST_PIN, 1);
    delay_ms(120);         /* Delay 120ms */
    write_reg(h,0x11);   /* Sleep out */
    delay_ms(120);         /* Delay 120ms */
}

static void set_color(lcd_handle_t *h, uint16_t color)
{
    int i,cnt=h->buflen/2;
    for(i=0; i<cnt; i++) {
        h->buf[i] = color;
    }
}
static void st7789_fill(lcd_handle_t *h, uint16_t color)
{
    int i;
    int height=h->height/DIV_NUM;
    
    set_color(h, color);
    for(i=0; i<DIV_NUM; i++) {
        st7789_refresh(h, 0, i*height, h->width, height, h->buf, h->buflen);
    }
    
}


#define SPI_BUS  "spi2"
#define SPI_DEV_NAME   "spi2.0"
int st7789_init(lcd_handle_t *h)
{
    int r;
    struct rt_spi_configuration sc;
    
    gpio_init(BK_PIN, GPIO_OUT, 0);
    gpio_init(DC_PIN, GPIO_OUT, 0);
    gpio_init(RST_PIN, GPIO_OUT, 0);
    
    r = rt_hw_spi_device_attach(SPI_BUS, SPI_DEV_NAME, CS_PIN);
    if(r!=RT_EOK) {
        return -1;
    }
    
    h->dev = (struct rt_spi_device*)rt_device_find(SPI_DEV_NAME);
    if(h->dev==NULL) {
        return -1;
    }
    
    sc.data_width = 8;
    sc.max_hz = 5 * 1000 * 1000;
    sc.mode = RT_SPI_MASTER | RT_SPI_MODE_0 | RT_SPI_MSB;
    r = rt_spi_configure(h->dev, &sc);
    
    h->buflen = (h->width*h->height*2)/DIV_NUM;
    h->buf = (uint16_t*)malloc(h->buflen);
    if (!h->buf) {
        LOGE("malloc buffer falied\n");
        return -1;
    }
    
    st7789_reset(h);
    st7789_reg_init(h);
    gpio_set(BK_PIN, 1);
    st7789_fill(h, COLOR_GREEN);

    return 0;
}
int st7789_deinit(lcd_handle_t *h)
{
    gpio_deinit(BK_PIN);
    gpio_deinit(DC_PIN);
    gpio_deinit(RST_PIN);
    
    free(h->buf);
    
    return 0;
}