SmartPDCode/truing_control/STS_FreeRTOS/HARDWARE/UI/lang.c

#include "lang.h"


//--no-multibyte-chars
//--locale=english

#if 1
    #define LOGD  LOG_D
    #define LOGE  LOG_E
#else
    #define LOGD  printf
    #define LOGE  printf
#endif
#if 0
enum {
    STR_ID_VER=0,
    STR_ID_ADDR,
    STR_ID_INPUT,
    STR_ID_OUTPUT,
    STR_ID_VOLTAGE,
    STR_ID_CURRENT,
    STR_ID_POWER,
    STR_ID_CONSUMP,
    STR_ID_FACTOR,
		
    STR_ID_SWITCH,
    STR_ID_TEMP,
    STR_ID_ON,
		
		
    STR_ID_OFF,
		STR_ID_FANS,
		STR_ID_BOUND,
		STR_ID_ONLINE,
		
		
		STR_ID_FREQ,
		STR_ID_INFO,
		STR_ID_STATUS,
		STR_ID_OFFLINE,
		STR_ID_C,
    STR_ID_MAX,
};
#endif

const char *lang_str_pool[2][STR_ID_MAX]={
    {
        "版本",     //STR_ID_VERSION
        "地址",     //STR_ID_ADDR
        "输入",     //STR_ID_INPUT
        "输出",     //STR_ID_OUTPUT
        "电压",     //STR_ID_VOLTAGE
        "电流",     //STR_ID_CURRENT
        "功率",     //STR_ID_POWER
        "电量",     //STR_ID_CONSUMP
        "因数",     //STR_ID_FACTOR
        "开关",     //STR_ID_SWITCH
        "温度",     //STR_ID_TEMP
        "开",       //STR_ID_ON
        "关",       //STR_ID_OFF
				"风扇",			//STR_ID_FANS
				"波特率",		//STR_ID_BOUND
				"在线",			//STR_ID_ONLINE
				"频率",			//STR_ID_FREQ
				"信息",			//STR_ID_INFO
				"状态",     //STR_ID_STATUS
				"离线",			//STR_ID_OFFLINE
				"主电源",		//STR_ID_MASTER_POWER
				"备用电源",	//STR_ID_BACK_POWER
				"℃",				//STR_ID_C
    },
    {
        "Version",  //STR_ID_VERSION
        "Addr",     //STR_ID_ADDR
        "INPUT",    //STR_ID_INPUT
        "OUTPUT",   //STR_ID_OUTPUT
        "Volt",     //STR_ID_VOLTAGE
        "Curr",     //STR_ID_CURRENT
        "Pwr ",     //STR_ID_POWER
        "Sum ",     //STR_ID_CONSUMP
        "Fact",     //STR_ID_FACTOR
        "Switch",   //STR_ID_SWITCH
        "Temp",     //STR_ID_TEMP
        "On",       //STR_ID_ON
        "Off",      //STR_ID_OFF
				"Fans",			//STR_ID_FANS
				"Online",		//STR_ID_ONLINE
				"Freq",      //STR_ID_FREQ
				"Info",			//STR_ID_INFO
				"Status",		//STR_ID_STATUS
				"Offline",   //STR_ID_OFFLINE
				"Main Power",	//STR_ID_MASTER_POWER
				"UPS",				//STR_ID_BACK_POWER
				"°C",				//STR_ID_C
    },
};


char* lang_get_str(int lang_id, int str_id)
{
    if(lang_id>=2 || str_id>=STR_ID_MAX) {
        return 0;
    }
    
    return (char*)lang_str_pool[lang_id][str_id];
}